Nosegear Warning Plate

[Rick Erwin]

Closing the loop on this project.

The bracket attaches to the inside of the lower, aft bolt that holds the nose gear limit switch bracket.

[Dan schultz]

You might want to inspect those wires from that squat switch in your photo. Mine had the insulation worn away exposing bare wire. I removed the wires to the terminal strip on the left hand side of the nose wheel well, used shrink wrap on each individual wire then used a piece of shrink wrap to encase both wires.

N67S
Dan Schultz

[Rick Erwin]

Thank you, Dan. I'll get those wires wrapped up.

Rick