|
Dear Sirs,
I have seen the Dynon EFIS installed in two certified aircraft here at Birminham, AL. Both installs were done by the MERCURY FBO under their repair station, with direct approval from the local FSDO.
Placards reading "Not Primary, For Reference Only" were required, as well as the retention of a TSO approved conventional attitude indicator in full view of the pilot. The approved indicator was to the side of the EFIS which was directly infront of the pilot at the top of the panel. A form 337 was required and filed.
I will attempt to obtain the form 337 and post it, as I intend to add EFIS to my 336 as soon as funds permit.
Regards
James T Grant
|
Hybrid Mode
