Skymaster Forum  

Go Back   Skymaster Forum > Messages
Register FAQ Members List Calendar Today's Posts

 
 
Thread Tools Rate Thread Display Modes
Prev Previous Post   Next Post Next
  #5  
Old 01-27-19, 08:56 PM
DrDave DrDave is offline
Registered User
 
Join Date: Nov 2010
Location: Seattle
Posts: 116
DrDave is on a distinguished road
Hi BILLS:

The circuit wires on my panel are mostly original. The eight-place circuit bus is for the avionics. I'm doing the Approach Fast-Stack system. All of the avionics power wires will go to that bus and the grounds will go to a dedicated single-point ground bus for the avionics. I ran parallel #8's to feed the battery, these are replacement/upgrades. The original charge wire had a poorly crimped end that was burnt from a poor connection. The alternator feed wires are new all of the way to the alternators.

What is the serial number of your plane? I will look and see if I have the wiring schematic for the alternator system.

Hope it warms up there soon. We can certainly make a list of things to check so you don't spend too much time in a freezing hanger.

Dave

Dave
Reply With Quote
 



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is Off
HTML code is Off
Forum Jump


All times are GMT -4. The time now is 02:32 PM.


Powered by vBulletin® Version 3.6.9
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.