What gauges/monitor for LOP operation

[hharney]

https://www.jpinstruments.com/shop/edm-760/

Probably the least expense. If you buy at Sun N Fun or Oshkosh they offer a nice rebate. This will do fuel flow also and could be added later to spread out the love

I really like mine but I know there are other units out there that are good too. A lot of info for the buck with the Insight G4 too

http://www.insightavionics.com/bestg4t.htm

I have seen the G4 and it has a lot of different info in one package.

I installed my own EDM760 so cost was minimal. Not a huge project but time consuming running all the wires to the rear engine. Make sure they know it's a Skymaster when you order

[Trippster]

Thanks Herb, Your insight is always helpful.

We plan on going to Sun n Fun, so it sounds like it's best to hold off until then before making any decisions. The Insight G4 seems to be a little small and condensed, but I like that they have one specifically for the 337. I tend to think that 2 EDM 830's would be easier to read and is about the same price as the G4. I'll talk to both vendors and continue to get advice until then.

Glad to hear that you did the install yourself. I have a good buddy that is an IA and is a small partner in my 337, so hopefully that means we could also do the install and save some money.