|
|
|||||||
| Register | FAQ | Members List | Calendar | Today's Posts | Search |
 |
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
#1
|
|||
|
|||
|
If you are gutted down to the bare bones I would really make an effort to get in there with the corrosion treatment and a hot water pressure washer in the whole thing. It will pay dividends for years to come. I'm sure you can rent the things too.
Dave 
|
|
#2
11-20-16, 10:07 PM
|
||||
|
||||
|
I like the way a good pressure washing looks, but I don't remember anything during my formal A&P training about pressure washing. I never read anything in the maintenance manual or the old AC 65-15 about pressure washing. I'm not judging, but I'm curious about tech data for cumulative fatigue on aluminum during a pressure wash....I'm sure it's dependent upon pressure, metal thickness, area, etc. Not to mention, that not all Skymasters are equal...pre 1973 used thinner aluminum. Looking for a discussion, not a shooting match.
|
Hybrid Mode
