One VERY good reason for owning a 337!

SkyKing One VERY good reason for... 12-08-04, 09:45 PM

Pat Schmitz That is a very sad... 12-09-04, 12:14 AM

Kevin McDonnell I don't know how he was... 12-09-04, 02:16 AM

SkyKing It's difficult to... 12-09-04, 05:54 AM

Kevin McDonnell re: the autopilot ... I... 12-10-04, 02:33 AM

Pat Schmitz I think the cheapest, best... 12-10-04, 03:21 AM

Richard I'm running a Dynon EFIS....... 12-11-04, 01:21 AM

Pat Schmitz Did you do a form 337 on it,... 12-11-04, 01:53 AM

Kevin McDonnell Is it true you can install a... 12-11-04, 02:12 AM

Richard Still working on an approval.... 12-11-04, 03:13 AM

Jose L. Ichaso Nice panel Richard!, there is... 12-11-04, 08:38 AM

Guest Wow 12-11-04, 10:15 AM

Richard NICE! Bet he LOVES his too. 12-11-04, 10:18 AM

Ernie Martin Wow, is right! Incredible... 12-11-04, 12:25 PM

WebMaster what is really amazing is the... 12-12-04, 11:26 AM

Ernie Martin Larry: Installation for both... 12-12-04, 02:04 PM

Jose L. Ichaso Carlos, the Seneca`s owner,... 12-12-04, 08:30 PM

Paul Sharp A few years ago I simply ... 12-12-04, 09:37 PM

WebMaster Talked with Sheila at Blue... 12-13-04, 10:27 AM

Pat Schmitz We all understand the need to... 12-13-04, 11:40 AM

WebMaster It is interesting, you can... 12-13-04, 12:07 PM

wybenga Faa Approved My Dynon... 07-06-05, 02:07 PM

Pat Schmitz WOW - that is great... 07-06-05, 02:22 PM

WebMaster Oh, me... 07-06-05, 02:27 PM

Guest $? 07-06-05, 03:06 PM

wybenga Dynon D10A Installation 07-06-05, 03:15 PM

Keeler You are the man. I have one... 07-06-05, 05:00 PM

Pat Schmitz If you can fax me a copy to... 07-06-05, 05:18 PM

wybenga Dynon Installation 07-06-05, 06:06 PM

J.T.Grant Dear Sirs, I have seen the... 07-08-05, 11:46 AM

Pat Schmitz Ok - I have the Fax, on the... 07-08-05, 03:41 PM

wybenga Dyno 337 07-08-05, 03:46 PM

Pat Schmitz Ok - Anyone who wants it...... 07-08-05, 04:10 PM

Jim Rainer What would really be nice is... 07-08-05, 07:06 PM

wybenga Jim, I will take a picture... 07-11-05, 10:47 AM

Pat Schmitz You can paste the picture... 07-11-05, 10:54 AM

Jim Rainer I agree. Thanks! Jim Rainer 07-11-05, 04:57 PM

wybenga N1049D Panel 07-19-05, 09:15 AM

Eustacio-Chachi This is the Blue Mountain... 07-19-05, 05:16 PM

Pat Schmitz I am curious to see if any... 10-13-05, 10:36 PM

wybenga Pat this is one that you... 10-14-05, 08:50 AM

Ernie Martin Pat: I agree with Jack that... 10-14-05, 12:25 PM

wybenga Ernie While the gps derived... 10-14-05, 03:26 PM

Ernie Martin I don't disagree that the... 10-14-05, 04:00 PM

Pat Schmitz For standard rate turns and... 10-14-05, 07:41 PM

Keeler Pat, I am in the process of... 10-14-05, 08:30 PM

Pat Schmitz Jack - Shared the 337 form... 11-09-05, 11:14 AM

wybenga Will send it to you on... 11-09-05, 02:37 PM

Keeler Pat. Thank you. My e-mail... 11-09-05, 07:36 PM

Pat Schmitz DYNON EFIS INSTALLATION 12-27-05, 01:29 AM

WebMaster Another good reason, but... 03-24-06, 07:55 AM

bawb I got field approval to put a... 04-27-06, 06:08 AM

Guest I spoke with a Dynon Rep at... 04-27-06, 10:38 AM

Richard Sounds like they are trying... 04-27-06, 09:52 PM

Guest I did not know that, but if... 04-27-06, 09:57 PM

#35

12-27-05, 01:29 AM

Pat Schmitz Pat Schmitz is offline

Member

Join Date: Mar 2004

Location: Midwest

Posts: 104

Pat Schmitz is an unknown quantity at this point

DYNON EFIS INSTALLATION

Ok - I get requests for this paperwork almost weekly - and surprisingly - about 1/2 the time from Non-337 pilots....

I would like to take a quick poll to see who has since completed this installation and the requisite 337 forms successfully?

The paperwork I have was not sufficient to convince my local FSDO officer to approve it..... he never said no - but rather he would look into it.... and has never, ever responded... I want to pursue this further - and I am hoping that there are others out there who have curagious and open-minded FAA Inspectors...

Perhaps there are 2 or 3 of you who have completed this, and I can again get copies of the paperwork for others who wish to take advantage of it??

Thanks, and Happy Holidays!!

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode	Rate This Thread: