Skymaster Forum

Skymaster Forum (http://www.337skymaster.com/messages/index.php)
-   Messages (http://www.337skymaster.com/messages/forumdisplay.php?f=1)
-   -   Bell Mech Cowl Kit (http://www.337skymaster.com/messages/showthread.php?t=4665)

Jhogan0101 03-27-20 05:28 PM

Bell Mech Cowl Kit
 
Anyone have this installed?
How difficult to operate during flight?

YankeeClipper 03-28-20 08:14 PM

1 Attachment(s)
If there is only one mechanical cowl actuator, then I have one. It's a little stiff, but nothing of concern. Mind you, that's the front. With all of the extra distance and the 180 degree turn on the cable, I can image the rear would be a bit hard to actuate.

YankeeClipper 03-28-20 08:15 PM

Oh ... and don't make fun--the panel is a work in progress.

hharney 03-30-20 09:04 PM

What's the price of the mechanical mod

Jhogan0101 03-30-20 09:22 PM

Herb,
Owen has it listed on his site for $1495
I called him to buy it, he said web price is a mistake and to order i needed to wire him $2995 (my plane came with an aftermarket not signed off hybrid 172 motor, ap said he had to remove)
I did and got the kit 2 months after i ordered it.
Recently during my annual, Craig went to put the kit in, and the front control pull handle was missing. I called Owen and said we didnt get the front cable, he said he would send one for $995.
I called Don to try and get the cable for a reasonable price but he said he probably didnt have and mech kit is bad idea because its too difficult to move it in flight. Thats the reason for my post anyway.

http://www.cessnaskymaster.com/mech-...ol-system.html

hharney 04-01-20 02:42 PM

Quote:

Originally Posted by Jhogan0101 (Post 24652)
Herb,
Owen has it listed on his site for $1495
I called him to buy it, he said web price is a mistake and to order i needed to wire him $3500 (my plane came with an aftermarket not signed off hybrid 172 motor, ap said he had to remove)
I did and got the kit 2 months later.
Recently during my annual, Craig went to put the kit in, and the front control pull handle was missing. I called Owen and said we didnt get the front cable, he said he would send one for $995.
I called Don to try and get the cable for a reasonable price but he said he probably didnt have and mech kit is bad idea because its too difficult to move it in flight. Thats the reason for my post anyway.

http://www.cessnaskymaster.com/mech-...ol-system.html

Here is how I read the website above, $1495.00 each (front or rear) PLUS your good Cowl Flap Motor that you removed to put his cable system on. It's how I see it, thoughts?

Cost for the front or rear conversion Kit (T-handle control cable, cable support brackets for each end, lever arm to attach to torque tube)
$1495 exchange for your repairable cowl flap motor.

Jhogan0101 04-01-20 03:19 PM

1 Attachment(s)
Thanks Herb,

I can understand that. Here is what he actually sent to me

“To begin, the old price showing on the web site is several years old.
I have contacted the web coordinator to update the web site.

The current price for either a new PMA cow flap motor or mechanical cowl flap system kit is $2995.00 with up to $500 rebate for an economically rebuildable cowl flap motor.

It is easier and better I believe to simply replace the motor and make sure that the microswitches are adjusted properly.

Please advise which you want, the replacement new motor or the mechanical system.

Also please advise the ship to address and if you have a shipping account number or if you want us to add the freight charge.”

hharney 04-02-20 10:46 AM

Quote:

Originally Posted by Jhogan0101 (Post 24668)
Thanks Herb,

I can understand that. Here is what he actually sent to me

“To begin, the old price showing on the web site is several years old.
I have contacted the web coordinator to update the web site.

The current price for either a new PMA cow flap motor or mechanical cowl flap system kit is $2995.00 with up to $500 rebate for an economically rebuildable cowl flap motor.

Is the $2995 for one cowling or both? If it's for one then you got a better deal on your kit but if it's for both then your deal that was charged to you was too much. Seems like these guys (Aviation Enterprises) are just shooting from the hip on items and not very consistent.

Jhogan0101 04-02-20 11:15 AM

Well i paid $2995, and only received the rear. Then i called Owen and he said that its not his fault i didnt get it and he would send the front one for ONLY $995. Im working with Don Nieser, he said he may have the cable i need for $150.


All times are GMT -4. The time now is 12:57 AM.

Powered by vBulletin® Version 3.6.9
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.