Interior Plastic Replacement

[kilr4d]

Originally Posted by SkyMac

...
In particular the lower section of the airstair door (we did this some time ago), pilot side window (K1515063-1) and side panel trims (K1515026-3&4). In the next few weeks I should receive the last of new plastic made with the latest changes.

For those who have the G model (Non P) and are in need of new plastic, I would recommend you give Katie a call at Plane Plastics. They have made many modifications to 337G moulds to accommodate these adjustments based on originals I have sent to them. There has been considerable cost on both sides to get these right, please take advantage of our efforts if your wanting to replace plastics in your "G" model (Non P)...

Dave, do you have any before/after pictures?

Originally Posted by Dale Campbell

...They covered the plastic in vinyl to match the rest of the interior and it came out beautiful....

Dale, same question; do you have any pictures?

Thanks,

John

[SkyMac]

Hi John

I will post some before and after when I get back to Aus, unfortunately that won't be until a couple of days before Christmas.

The headliner has been the biggest challenge, I had almost finished designing then building a new 6 section liner when time to head O/S again.


Dave

[kilr4d]

Originally Posted by SkyMac

I will post some before and after when I get back to Aus, unfortunately that won't be until a couple of days before Christmas.

Got it. Thank you.

[kilr4d]

Originally Posted by SkyMac

Hi John

I will post some before and after when I get back to Aus, unfortunately that won't be until a couple of days before Christmas.

The headliner has been the biggest challenge, I had almost finished designing then building a new 6 section liner when time to head O/S again.


Dave

*bump*

[SkyMac]

Hi Everyone

Thanks for asking, It took most of January to get the old girl back together and rigged before starting engine runs, then I had to head O/S again. So all that is left is fitting the new interior, I just need to be home to do it.

Dave