![]() |
|
Register | FAQ | Members List | Calendar | Search | Today's Posts | Mark Forums Read |
|
Thread Tools | Rate Thread | Display Modes |
#3
|
||||
|
||||
![]() Over 25+ years I have tried everything.
What finally worked was buying 1/16th x 1/2 inch wide closed cell phone tape, found on ebay. I applied the tape to both the door frame and the door, so when the door closes the seal forms BETWEEN the two touching, attached layers of tape. The 1/16th allows you to build layers where needed, and not where it causes trouble. I ran a thin piece of something (paper? String?) along the seal, in between the two layers of touching tape, until it was held at every point. Now I can fly the aircraft under water and it remains tight.
__________________
David Wartofsky Potomac Airfield 10300 Glen Way Fort Washington, MD 20744 |
Thread Tools | |
Display Modes | Rate This Thread |
|
|