Skymaster Forum  

Go Back   Skymaster Forum > Messages
Register FAQ Members List Calendar Search Today's Posts Mark Forums Read

Reply
Thread Tools Rate Thread Display Modes
  #16  
Unread 02-16-20, 08:43 AM
JAG JAG is offline
Registered User
 
Join Date: Jun 2014
Location: Texas
Posts: 260
JAG is on a distinguished road
Adapter

Owen Bell at Aviation Enterprises is also another source for the adapter.
Jeff
Reply With Quote
  #17  
Unread 02-16-20, 11:54 AM
cessnadriver's Avatar
cessnadriver cessnadriver is offline
Registered User
 
Join Date: May 2010
Location: Kempner, TX
Posts: 359
cessnadriver is on a distinguished road
Smile power adapter for hyd. pump

wslade2.
I purchased the spline sockets from Sears paid about $40. It comes with about 10 different sized sockets. With Sears all but closed you can check the internet, or get them at Harbor Freight for $10. I know a lot of mechanics don't like HF quality but these socket and what you're about use them for it's fine. I don't remember what size fits the Hyd. pump spline,but you can figure it out. If you buy the HF sockets be sure you pick up a 6"-12" 3/8" extension that you can cut off the female end and install that into a 1/2" variable speed electric drill to turn the hyd. pump. You can buy the drill from HF as well-again quality not great but cheap to do the job! All for about $60.
Regards, BILLS
Reply With Quote
  #18  
Unread 02-19-20, 11:31 PM
wslade2 wslade2 is offline
Registered User
 
Join Date: Feb 2016
Location: none
Posts: 301
wslade2 is on a distinguished road
Yup, just left harbor freight, got spline socket set for $9.95, goes right on the pump shaft. Already had drill, drill driver adapter, extensions, etc.
Reply With Quote
  #19  
Unread 02-20-20, 08:37 AM
cessnadriver's Avatar
cessnadriver cessnadriver is offline
Registered User
 
Join Date: May 2010
Location: Kempner, TX
Posts: 359
cessnadriver is on a distinguished road
Hydraulic pump shaft adapter

wslade2.
Good deal! Hope you have good luck with this procedure. Let us know how it go for you.
Regards, BILLS
Reply With Quote
Reply


Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is Off
HTML code is Off
Forum Jump


All times are GMT -4. The time now is 07:44 AM.


Powered by vBulletin® Version 3.6.9
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.