|
Register | FAQ | Members List | Calendar | Today's Posts | Search |
|
Thread Tools | Rate Thread | Display Modes |
|
#1
|
|||
|
|||
Cable routing
Hello Brent-
Planning to head down to the hanger tomorrow with your info in hand and see what I can figure out-thank you so much for taking the time to try to help. Best-Ray |
#2
|
||||
|
||||
Ray, if you need I can send pics, but I will need a phone number...still have a flip phone lol
|
#3
|
|||
|
|||
Hey Brent-
didn't get down to the hanger today--plant problems--tomorrow I hope--cable goes back to the battery box--under the battery box?--and makes a 90 degree along the front bulkhead? Ray |
#4
|
||||
|
||||
90 degree bend at the front of the battery box then direct to the hole that is probably plugged between the vacuum pump and starter contactor.
|
#5
|
|||
|
|||
Cable for Ex. Control
Hello Brent---
Partial joy! I did find the hole through the front bulkhead located right where you said it was. It was completely filled with press. Sealant Of course I can see the battery box. If it is possible to shoot a couple of cell phone pics (uh-oh-flip phone) of the cable at the batt. Box location- it would help a lot. Don,t mean to impose but I want to try to get this right. No problem either way-you have been a big help. Thanks for all-Ray |
#6
|
||||
|
||||
Ok Ray,
I'll take my ipad with me tomorrow and get some pics. |
#7
|
|||
|
|||
My cell
607-226-0706
|