Skymaster Forum  

Go Back   Skymaster Forum > Mechanics and Service Providers
Register FAQ Members List Calendar Search Today's Posts Mark Forums Read

Reply
 
Thread Tools Rate Thread Display Modes
  #1  
Old 04-12-18, 12:31 PM
spurlockda spurlockda is offline
Registered User
 
Join Date: May 2015
Location: Nevada
Posts: 5
Urgent A&P Help Near KDVT

Hi everyone,

Weird thing happening while I am going through my Initial Transition course. I bought N937DY up in Canada and when the Canadian Instructor and I flew down to KHND, we cruised nonstop at 17k with no issues whatsoever. Heat and pressurization were wonderful.

The plane sat on HNDís flight line for about two months while I wrangled with the Insurance cartels and finding a Initial/Transition school.

When the Initial school instructor and I flew to KDVT, we noted manifold pressures sub nominal for a turbo/pressurized aircraft. We flew it again the next day in a meticulous test profile and (hereís the weird part) both MPs are low to the point of seeming like a normally aspirated plane. Take off pressures are normal but as we get up to and past 10k, the MPs donít keep up with the climbs and the cabin pressures donít seem to keep up either. CHTs, TITs and etc are good; engines are leaned properly and everything else is conducted in accordance with the current POH.

Does anyone out there know of a great 337 A&P in the Phoenix area. We have elected to slow down or suspend the Initial/Transition training until we can get the A&P to check things out.

Please help - I want to fly my airplane solo!!!!!!!!
Reply With Quote
  #2  
Old 04-13-18, 08:04 AM
hharney's Avatar
hharney hharney is offline
Rough Surface
 
Join Date: Jul 2002
Location: Michigan (8D4)
Posts: 1,868
Check with Falcon Field in Mesa. They likely will have some experience.

Sounds like it's the waste gate sticking open. If the airplane has sat for a while it will need to mouse milk lube
__________________
Herb R Harney
1968 337C

Flying the same Skymaster for 41 years
Reply With Quote
  #3  
Old 04-13-18, 11:29 AM
spurlockda spurlockda is offline
Registered User
 
Join Date: May 2015
Location: Nevada
Posts: 5
Weird anomaly

Quote:
Originally Posted by hharney View Post
Check with Falcon Field in Mesa. They likely will have some experience.

Sounds like it's the waste gate sticking open. If the airplane has sat for a while it will need to mouse milk lube
Thanks Herb!

The weird part is that it is both engines. Both MP readings are abnormal. I suppose both waste gates could be sticking. Iím sure the plane is experiencing environmental shock since it went from always hangared up in cool British Colombia to out in the hot sun of Henderson NV.

My first guess was something wrong with the gauge but when we tested the various altitudes and there was definitely a performance degradation.

Take offs are great even at the hot & high altitudes of Prescott and Phoenix but once we get up to 10k and beyond the performance hit becomes evident.

I agree with the instructor about not doing any single engine practice until we get the problem fixed but the one time we did, it was eye-opening. 😳
Reply With Quote
  #4  
Old 04-13-18, 01:13 PM
JimC's Avatar
JimC JimC is offline
Registered User
 
Join Date: Aug 2012
Location: United States
Posts: 136
I had that happen to a twin turbo plane (both wastegates stuck open at the same time after an extended sit.)

I didn't get off the ground - it showed up on the takeoff roll.
Reply With Quote
  #5  
Old 04-13-18, 08:38 PM
general's Avatar
general general is offline
Registered User
 
Join Date: Nov 2003
Location: Belize City, Belize, Kiowa, KS, Breckenridge, CO
Posts: 26
Herb is about 100% righ,
t you need to get it coated with mouse milk lubricant so the gages work properly. I've seen this problem, and the plains been setting in a dry climat like Phoenix
Good luck but don't let them try to sell you a couple of new turbos, check the wastegates first.
__________________
General Sky
Tree top Flying in C336, O2, 337A, P337G with IO-550's
Reply With Quote
  #6  
Old 04-14-18, 05:15 PM
spurlockda spurlockda is offline
Registered User
 
Join Date: May 2015
Location: Nevada
Posts: 5
Mouse Milk

Thanks guys,

Do yíall think if is rust forming while itís sitting? Iíll try the mouse milk if I can find some. Plus Iíll head over to Falcon.

I didnít come down with tools so about the only thing I can do is beat Ďem with a big rock 🤭😂

Last edited by spurlockda : 04-14-18 at 05:19 PM.
Reply With Quote
Reply


Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is Off
HTML code is Off
Forum Jump


All times are GMT -4. The time now is 06:07 AM.


Powered by vBulletin® Version 3.6.9
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.