Skymaster Forum  

Go Back   Skymaster Forum > Messages
Register FAQ Members List Calendar Search Today's Posts Mark Forums Read

Reply
Thread Tools Rate Thread Display Modes
  #1  
Unread 02-23-20, 10:10 AM
n86121's Avatar
n86121 n86121 is offline
bigcheese
 
Join Date: Nov 2003
Location: Potomac Airfield~!
Posts: 318
n86121 is on a distinguished road
Quick pre-takeoff gear hydraulic check

THE ULTIMATE 337 MULTI CHECK RIDE

Many moons ago, just after I bought my 'thrasher, I had a gear hydraulic line fail on my multi-engine check ride in 100F heat with an FAA inspector on board in back.

Nothing better than hearing on your multi-engine checkride in your new airplane with an FAA inspector in back,

"As per regulation XYZ, check ride is terminated, prepare for crash landing."

Back then FSDO inspectors had to go on random inspections, and I am sure to this day that fellow thought, "And I had to pick this one!"

UPGRADED LINES

BACK then I had ALL of the lines replaced with fancy 1) MIL spec 2) teflon-lined 3) metal-shielded lines. My understanding was the teflon-lined stuff doesn't break down internally like regular lines, and the metal shield helps them from 'ballooning' with each cycle, as well as mechanical protection.

My most recent upgrade a few years back was to switch them ALL again to 1) MIL spec teflon lined 3) metal shielded AND 4) flame proofed (orange stuff). My understanding the flame-proof stuff also protects them from thermal degradation from engine heat.

Suffice to say, that check ride got my attention.

=========================
PRELIGHT QUICK CHECK

Studying the hydraulics (hey, I'm a nerd, and maybe a bit of an idiot savant), I came up with a quick procedure to check the integrity of the hydraulic system before takeoff.

ON GROUND GEAR CHECK PROCEDURE

1. Scary thought it may sound, while taxiing

Cycle the gear handle down from DOWN-LOCKED to DOWN,
as if you are putting the gear down.

This pressurizes the whole system through its cycles
and returns the gear handle to DOWN LOCKED position

2. If the system is low on juice, the time to cycle increases.
I have dual hydraulic pumps.
This cycle in summer can be around 4 secs, in winter maybe 6 secs.
At around 9 secs stop and refill the hydraulic reservoir

3. If there is a leak anywhere, or any other problem,
the system won't be able to get to the full pressure
and it wont be able to push the handle back to DOWN-LOCKED.

Better to know on the ground than to discover in the air.
__________________
David Wartofsky
Potomac Airfield
10300 Glen Way
Fort Washington, MD 20744
Reply With Quote
  #2  
Unread 02-23-20, 05:51 PM
hharney's Avatar
hharney hharney is offline
Forum Administrator
 
Join Date: Jul 2002
Location: Michigan (8D4)
Posts: 2,253
hharney is on a distinguished road
Standard procedure on the Piper Navajo and Cheyenne's. It's on the checklist before takeoff and before landing. Nothing new but Cessna never caught on to the idea. It's not a bad idea but I only do it about every 4-6 flights. Seems redundant to do every flight when you really know the airplane.

The procedure checks each hydraulic pump also. On start up you check the first engine started to be sure that pump is producing and on shut down you turn off that engine you checked on startup first so you can check the opposite pump before shutting down this engine.

Piper, they do things simple compared to Cessna. Cessna changed things every year they built the Skymaster. Once Piper had a system they used it throughout many years of different aircraft. Not saying Cessna was wrong, just different. They did sell more manuals that way too.
__________________
Herb R Harney
1968 337C

Flying the same Skymaster for 47 years
Reply With Quote
Reply


Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is Off
HTML code is Off
Forum Jump


All times are GMT -4. The time now is 05:23 AM.


Powered by vBulletin® Version 3.6.9
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.