Front ram air heat exchanger control cable

[raykenyon]

Hey Brent-

didn't get down to the hanger today--plant problems--tomorrow I hope--cable goes back to the battery box--under the battery box?--and makes a 90 degree along the front bulkhead?

Ray

[Red Air Rambo]

90 degree bend at the front of the battery box then direct to the hole that is probably plugged between the vacuum pump and starter contactor.

[raykenyon]

Hello Brent---
Partial joy! I did find the hole through the front bulkhead located right where you said it was. It was completely filled with press. Sealant

Of course I can see the battery box. If it is possible to shoot a couple of cell phone pics (uh-oh-flip phone) of the cable at the batt. Box location- it would help a lot. Don,t mean to impose but I want to try to get this right. No problem either way-you have been a big help.

Thanks for all-Ray

[Red Air Rambo]

Ok Ray,
I'll take my ipad with me tomorrow and get some pics.

[raykenyon]

607-226-0706

[Red Air Rambo]

Ray, I sent one from my phone but I have some better ones from my Ipad, if you could post or text your email address I'll send those too.

--Brent

[Red Air Rambo]

Enjoyed talking to you today Ray, best of luck. Call me if I can be of any more help.
--Brent