Skymaster Forum  

Go Back   Skymaster Forum > Messages
Register FAQ Members List Calendar Today's Posts

Reply
Thread Tools Rate Thread Display Modes
  #1  
Unread 03-06-05, 09:29 AM
kevin kevin is offline
Registered User
 
Join Date: Apr 2002
Location: Hillsboro, OR (HIO)
Posts: 843
kevin is on a distinguished road
Ideas for TBO Poll

Kyle et al,

Oops. I was trying to remove Kyle's poll, and I removed the entire thread by mistake.

Very sorry.

Anyway, here is the beginning of a thread call "Ideas for TBO Poll", as Kyle suggested...

Kevin

Last edited by kevin : 03-06-05 at 09:35 AM.
Reply With Quote
  #2  
Unread 03-06-05, 09:35 AM
kevin kevin is offline
Registered User
 
Join Date: Apr 2002
Location: Hillsboro, OR (HIO)
Posts: 843
kevin is on a distinguished road
Kyle,

I still don't think your simple polls are going to produce meaningful data. For example, I have overhauled to engines, one at 800 after a catastrophic failure, the other at 1600 based on time only. I can only vote once for my P model. How do I vote?

It might be more useful to have people send you (or someone, not me) email and tabulate it, than it would to use the site's polling mechanism.

My thoughts, FWIW.

Kevin
Reply With Quote
  #3  
Unread 03-06-05, 06:36 PM
Keven
Guest
 
Posts: n/a
Glutton for Punishment

If we'd like to make this as complicated as possible, there really should be 4 polls, 1 for front in a normally aspirated, 1 for rear in normally aspirated, and 1 for each in turbo/P models. These 4 polls are probably the best way to get all the info sought, as well as seeing if there are any bizarre trends for front and rear engine replacements in normally aspirated and turbo/ps.

IMHO.

Keven
________
Ship Sale

Last edited by Keven : 04-23-11 at 05:09 PM.
Reply With Quote
  #4  
Unread 03-06-05, 07:44 PM
KyleTownsend KyleTownsend is offline
Member
 
Join Date: Feb 2004
Location: TN
Posts: 135
KyleTownsend is an unknown quantity at this point
Kevin:

I know it's not ideal, but I indicated in the instructions that you should only VOTE based on your MOST RECENT overhaul. This would eliminate any bias resulting from people tending to report only their highest, or lowest, time engine and still make the poll valid.

I was going to use the optional part of the poll (the message) to perform a more complete spreadsheet analysis after the poll closes.

Earnie. Thanks for your remarks. I see what you are getting at. My original idea was for people to report overhaul for ANY reason. You've got to figure that the vast majority of people are going to have some rational reason. If it is regulatory, or due to an accessory flying apart and damaging the engine, you've still got to overhaul the engine. So it would be good to know. Hopefully, people would supply enough information in their message attachment so that you could do an analysis on a subset of the data (ie: only engines that experienced mechanical failure).

Kyle
Reply With Quote
  #5  
Unread 03-06-05, 08:45 PM
kevin kevin is offline
Registered User
 
Join Date: Apr 2002
Location: Hillsboro, OR (HIO)
Posts: 843
kevin is on a distinguished road
OK, so (and this is the actual case), I overhauld both engines at the same time. I guess I'll have to ask the mechanic which one he installed last... ;-)

I am kidding you mostly. But the above is the actual case for me.

Anyway, whatever y'all want to do is fine with me.

Kevin
Reply With Quote
  #6  
Unread 03-06-05, 09:12 PM
KyleTownsend KyleTownsend is offline
Member
 
Join Date: Feb 2004
Location: TN
Posts: 135
KyleTownsend is an unknown quantity at this point
Argh!

I didn't think about the case in which both were overhauled at the same time.

Anyway, hopefully, people will attach a comment and I can do a more thorough analysis.
Reply With Quote
  #7  
Unread 03-06-05, 09:12 PM
Keven
Guest
 
Posts: n/a
Against My Better Judgment

I'll respond that maybe, with this group of folks, you would want all of their Skymaster experiences, not just their most recent engine replacement thoughts. I've got to confess, with a thinner wallet, that I will replace my second engine in two years in the next couple of months, so I've got a pretty fresh and painful impression concerning these things in my simple mind.

I know that Larry has also replaced both of his engines within the last couple of years, and thus, my suggestion. BTW, I do not suggest that Larry's mind is nearly as simple as mine.

Keven
________
Ipad cases

Last edited by Keven : 04-23-11 at 05:10 PM.
Reply With Quote
  #8  
Unread 03-07-05, 06:08 AM
KyleTownsend KyleTownsend is offline
Member
 
Join Date: Feb 2004
Location: TN
Posts: 135
KyleTownsend is an unknown quantity at this point
Kevin,

Preceicely!

That is what I ask folks to do in the message they attach. Maybe my instructions weren't as clear as they should have been?
Reply With Quote
  #9  
Unread 03-07-05, 08:13 AM
WebMaster's Avatar
WebMaster WebMaster is offline
Web Master
 
Join Date: Apr 2002
Location: Cleveland, OH
Posts: 1,524
WebMaster is on a distinguished road
Re: Against My Better Judgment

Quote:
Originally posted by Keven
I've got to confess, with a thinner wallet, that I will replace my second engine in two years in the next couple of months, so I've got a pretty fresh and painful impression concerning these things in my simple mind.

I know that Larry has also replaced both of his engines within the last couple of years, and thus, my suggestion. BTW, I do not suggest that Larry's mind is nearly as simple as mine.

Keven
Oh, shucks, Keven, you can say that. It is a painful experience, though, as I'll freely (it's the only thing I can afford these days, free) admit.
Reply With Quote
  #10  
Unread 03-07-05, 11:46 AM
big al 08 big al 08 is offline
Member
 
Join Date: Mar 2005
Location: beach in mx
Posts: 128
big al 08 is an unknown quantity at this point
replaced both mills w/remans at 1450hrs., could have gone longer, but oil comsumption was 1qt every 2hrs. really got tired of cleaning the belly constantly.
also they were orginal engines and were
30yrs old. purchased it with tt750.0hrs.
also thought it was wise after 30yrs to
change all excessories and hoses, not sorry, 259hrs and narfy a problem.
Reply With Quote
Reply



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is Off
HTML code is Off
Forum Jump


All times are GMT -4. The time now is 06:59 PM.


Powered by vBulletin® Version 3.6.9
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.