Skymaster Forum  

Go Back   Skymaster Forum > Messages
Register FAQ Members List Calendar Today's Posts

Reply
Thread Tools Rate Thread Display Modes
  #1  
Unread 08-02-05, 09:30 PM
Guy Paris's Avatar
Guy Paris Guy Paris is offline
Registered User
 
Join Date: Jul 2002
Location: Nashua NH. (near ASH)
Posts: 266
Guy Paris is an unknown quantity at this point
Cool Prop Control Cable...

HI ALL,
IS THERE ANYTHING OTHER THAN CESSNA FOR A PROP CONTROL CABLE FOR THE 337 G's? guy, the old 72 driver....
Reply With Quote
  #2  
Unread 08-03-05, 01:50 PM
Mark Hislop Mark Hislop is offline
Registered User
 
Join Date: May 2002
Location: Aurora, IL (ARR)
Posts: 171
Mark Hislop is an unknown quantity at this point
Guy:

If by "anything other than Cessna" you mean Cessna parts, then I think right now the only choice you have is Cessna parts. Nobody else makes them that I know of. But you can buy Cessna parts from sources other than Cessna, often at lower prices. You might start with Don Neisser, here on the forum.

At Oshkosh, I talked with the folks at MacFarlane. They make very good control cables for single engine Cessnas, but right now do not make them for the 337. But they said they are getting ready to do so. Just exactly when they will be ready...who knows?

Mark
__________________
Mark Hislop
N37E
Reply With Quote
  #3  
Unread 08-04-05, 11:19 PM
Guy Paris's Avatar
Guy Paris Guy Paris is offline
Registered User
 
Join Date: Jul 2002
Location: Nashua NH. (near ASH)
Posts: 266
Guy Paris is an unknown quantity at this point
Cool Prop Control Cable...

Thanks Mark,
What we did was get a new Cessna cable and place it next to the other one which was only 10 month old and gave both a nice easy bend of 180 degrees. The old one had a grinding feel to it even after pumping some lube in it and the newer one felt much smoother. We then put the new one on. guy...
Reply With Quote
Reply



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is Off
HTML code is Off
Forum Jump


All times are GMT -4. The time now is 11:51 PM.


Powered by vBulletin® Version 3.6.9
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.