Rigging

[cessnadriver]

Hello ALL.
Attached is a rigging fixture an A&P can made to check the properly rigged rudders. As an A&P, and a 65 C337 owner, I plan on making one of these fixture and check my own bird. Any competent A&P SHOULD be able to use this fixture and FOLLOW the maintenance manual and rig your bird. If said A&P doesn't have any or very little experience with the Skymaster as I'm still learning on mine it will take more time so be aware of this fact going in.
Hope this helps.
Regards
BILLS

[kilr4d]

Originally Posted by cessnadriver

Hello ALL.
Attached is a rigging fixture an A&P can made to check the properly rigged rudders. As an A&P, and a 65 C337 owner, I plan on making one of these fixture and check my own bird. Any competent A&P SHOULD be able to use this fixture and FOLLOW the maintenance manual and rig your bird. If said A&P doesn't have any or very little experience with the Skymaster as I'm still learning on mine it will take more time so be aware of this fact going in.
Hope this helps.
Regards
BILLS

Bill that's great. Thank you.

[kilr4d]

Brought that pdf file over to the waterjet cutting place and they zipped it right out.

[cessnadriver]

John. Looks nice what did that cost if you don't mind me asking.
BILLS

[kilr4d]

Originally Posted by cessnadriver

John. Looks nice what did that cost if you don't mind me asking.
BILLS

No problem. $120CAD so about $95USD plus $20 cash for the 0.10" aluminum.