Hyd Pumps

GMPoland · #1 02-24-20, 09:47 PM

Thanks for the info. Located a hydraulic mule at last and going to check system during annual next week. Still doing the search for pumps or info on overhaul kits and parts .

wslade2 · #2 02-26-20, 06:04 PM

Hmmm. Going through the pump issue myself. "stole" one of quality's good pumps a few weeks ago. I haven't sent my core in yet. Wonder if it will be good. If it is, wonder if can direct it your way....

be aware. slight mixup slowed things down: rear pump is a little different than front pump in terms of drain port location where mounts to engine block. check "dash numbers" on the pumps. I have an E model with dual pumps.

if my core is bad, I already know it will be $2000 on top of the cost of the pump. so yes expensive.

Skymaster337B · #3 02-28-20, 05:57 PM

Eaton makes these pumps. But I don’t know what the new part number is.

GMPoland · #4 02-29-20, 11:29 PM

Thanks for the reply’s. Still working the issues.

wslade2 · #5 03-05-20, 09:59 PM

I just sent my rear core in to Quality. should be arriving any day. it's a 20240-ICF (be sure to note dash number/letters). Should be serviceable/rebuildable as it was making pressure when I took it off.