|
Register | FAQ | Members List | Calendar | Today's Posts | Search |
Thread Tools | Rate Thread | Display Modes |
#1
|
|||
|
|||
Hey there 'skymaster'... was curious about the "improved cartridge" on the upper door opener. Was this something from Owen Bell too?
SkyKing |
#2
|
|||
|
|||
yes
it seals better keeping the door at 90 degrees open. alsso forgot to mention landing gear power pac exchange. J
|
#3
|
|||
|
|||
Improved door opener cartridge
Maybe the reason your OEM door holder-opener wasn't working properly was due to inadequte operating pressure? The normal operating PSI is around 650 to 750 PSI.
What's different about the 'improved' version from Bell? Oh, and how much moola-moola? SkyKing |
#4
|
|||
|
|||
We changed the seals in the factory stock cylinder a few years ago in my P model, and it held the door at 90 degrees just famously. Not sure why you would need a new one...
Seals cost a couple of bucks. Kevin |
#5
|
|||
|
|||
failing memory
cannot remember what door parts but it works splendidly. {snip by webmaster, moved to another thread}
Last edited by kevin : 01-23-05 at 07:02 PM. |