Cabin Door Lift Assist

[ljmolina]

My service manual says to charge the cylinder 700 psi. But yes, it would be nice to see pictures. Must of been a later update.

[Kim Geyer]

When I resealed ours I’m thinking I would give it about 525 psi to get the door to raise on its own. But that was my old gauges the only interior I had to remove was the trim around the window behind the door and the aft door trim.

[mshac]

Originally Posted by ljmolina

My service manual says to charge the cylinder 700 psi. But yes, it would be nice to see pictures. Must of been a later update.
Attachment 2887

No, its just my reading comprehension skills. I scanned it too fast and saw where they use shop air at the beginning of the procedure. I assumed that was to recharge the accumulator, but if you read further, you see that its not.