|
Register | FAQ | Members List | Calendar | Today's Posts | Search |
|
Thread Tools | Rate Thread | Display Modes |
|
#1
|
|||
|
|||
Hey Brent-
didn't get down to the hanger today--plant problems--tomorrow I hope--cable goes back to the battery box--under the battery box?--and makes a 90 degree along the front bulkhead? Ray |
#2
|
||||
|
||||
90 degree bend at the front of the battery box then direct to the hole that is probably plugged between the vacuum pump and starter contactor.
|
#3
|
|||
|
|||
Cable for Ex. Control
Hello Brent---
Partial joy! I did find the hole through the front bulkhead located right where you said it was. It was completely filled with press. Sealant Of course I can see the battery box. If it is possible to shoot a couple of cell phone pics (uh-oh-flip phone) of the cable at the batt. Box location- it would help a lot. Don,t mean to impose but I want to try to get this right. No problem either way-you have been a big help. Thanks for all-Ray |
#4
|
||||
|
||||
Ok Ray,
I'll take my ipad with me tomorrow and get some pics. |
#5
|
|||
|
|||
My cell
607-226-0706
|
#6
|
||||
|
||||
Ray, I sent one from my phone but I have some better ones from my Ipad, if you could post or text your email address I'll send those too.
--Brent |
#7
|
||||
|
||||
Enjoyed talking to you today Ray, best of luck. Call me if I can be of any more help.
--Brent |