Skymaster Forum  

Go Back   Skymaster Forum > Messages
Register FAQ Members List Calendar Search Today's Posts Mark Forums Read

Reply
Thread Tools Rate Thread Display Modes
  #1  
Unread 12-17-20, 06:07 PM
Jhogan0101's Avatar
Jhogan0101 Jhogan0101 is offline
Registered User
 
Join Date: Mar 2019
Location: Philadelphia
Posts: 186
Jhogan0101 is on a distinguished road
Scat tube routing around rudder controls

Anyone have any photos of some tidy routing?

My pilot side one is currently zip tied to the rudder pedal torque tube.

Im sure there is a better way to do this.
__________________
337B
Philadelphia PA
Reply With Quote
  #2  
Unread 12-23-20, 07:44 PM
JAG JAG is offline
Registered User
 
Join Date: Jun 2014
Location: Texas
Posts: 260
JAG is on a distinguished road
Will send pics tomorrow.
Jeff
Reply With Quote
  #3  
Unread 12-24-20, 10:59 PM
wslade2 wslade2 is offline
Registered User
 
Join Date: Feb 2016
Location: none
Posts: 301
wslade2 is on a distinguished road
I have that area apart right now for some brake work. There is a duct that runs vertically from heat duct to defroster outlet. With no excess slack it is not able to get over that far. Pretty much a straight shot. Is this what you’re talking about? Maybe your duct is too long. Perhaps check the parts manual for your model. Might give a drawing of how things are supposed to be.
Reply With Quote
  #4  
Unread 12-25-20, 01:18 PM
Jhogan0101's Avatar
Jhogan0101 Jhogan0101 is offline
Registered User
 
Join Date: Mar 2019
Location: Philadelphia
Posts: 186
Jhogan0101 is on a distinguished road
This is both sides here, just doesnt seem like a great way to run these.
Nothing in service/parts manual about it.
Just wondering if someone else figured out a better/neater way to do this.

https://ibb.co/YXFWmMw
https://ibb.co/Bwd4gpN
__________________
337B
Philadelphia PA
Reply With Quote
  #5  
Unread 12-27-20, 08:35 PM
wslade2 wslade2 is offline
Registered User
 
Join Date: Feb 2016
Location: none
Posts: 301
wslade2 is on a distinguished road
I have attached photos of my routing of the defroster tube and scat ducting. At least I hope I have successfully attached the photos. If not, basically the scat tubing goes behind the crossover linkage/bar for the rudder pedals and brakes straight up to defroster duct. I have a rigid tube that runs behind the crossover linkage but it is same diameter as scat tubing so scat tubing should be able to made to work.
Attached Images
File Type: jpg defroster 1.jpg (87.8 KB, 697 views)
File Type: jpg defroster 2.jpg (81.0 KB, 678 views)
File Type: jpg defroster 3.jpg (76.7 KB, 662 views)
File Type: jpg defroster 4.jpg (86.2 KB, 681 views)
File Type: jpg defroster 5.jpg (76.6 KB, 668 views)

Last edited by wslade2 : 12-27-20 at 08:38 PM.
Reply With Quote
Reply


Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is Off
HTML code is Off
Forum Jump


All times are GMT -4. The time now is 08:34 AM.


Powered by vBulletin® Version 3.6.9
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.