Skymaster Forum  

Go Back   Skymaster Forum > Flight Instruction and Recurrent Training
Register FAQ Members List Calendar Today's Posts

Reply
Thread Tools Rate Thread Display Modes
  #1  
Unread 09-04-19, 01:53 PM
YankeeClipper's Avatar
YankeeClipper YankeeClipper is offline
Registered User
 
Join Date: Apr 2013
Location: CT
Posts: 262
YankeeClipper is on a distinguished road
DPE in the northeast?

Hi all--hope this is the right section for this.

I'm looking for a Skymaster-qualified DPE in the northeast--preferably in southern New England.
Any references?

Thanks.
Reply With Quote
  #2  
Unread 09-05-19, 09:00 PM
cessnadriver's Avatar
cessnadriver cessnadriver is offline
Registered User
 
Join Date: May 2010
Location: Kempner, TX
Posts: 359
cessnadriver is on a distinguished road
DPE in the northeast?

I know a DPE with Skymaster experience in Jamestown, NY, Jamestown is located in the far southwest corner of NY state,if that helps? I used him just last month, he charges $500. If you would like his contact information send me a email at bstory@pa.rr.com.
Regards, BILLS
Reply With Quote
  #3  
Unread 09-05-19, 11:13 PM
YankeeClipper's Avatar
YankeeClipper YankeeClipper is offline
Registered User
 
Join Date: Apr 2013
Location: CT
Posts: 262
YankeeClipper is on a distinguished road
Thanks for that. Might need that if I can't find anyone nearby who's willing to put the hours in for CLT.

What exactly does a DPE have to do to qualify for testing CLT anyway?
Reply With Quote
  #4  
Unread 09-06-19, 08:32 AM
cessnadriver's Avatar
cessnadriver cessnadriver is offline
Registered User
 
Join Date: May 2010
Location: Kempner, TX
Posts: 359
cessnadriver is on a distinguished road
DPE in the northeast?

From what I was told, the DPE has to be current and have 5 hours in type. If you use this DPE PLEASE be sure your up on the ACS maneuvers and DON'T FORGET CLEARING TURNS!! I busted it twice and now I have to go Nashville Tn, fly with a new CFI and then use a new DPE in Charleston, WV, and take the whole check ride OVER.
Good luck. BILLS
Reply With Quote
  #5  
Unread 09-06-19, 02:21 PM
YankeeClipper's Avatar
YankeeClipper YankeeClipper is offline
Registered User
 
Join Date: Apr 2013
Location: CT
Posts: 262
YankeeClipper is on a distinguished road
Wow. That's brutal. Sorry to hear it. And thanks for the reminder.
Reply With Quote
  #6  
Unread 09-10-19, 09:30 PM
hharney's Avatar
hharney hharney is offline
Forum Administrator
 
Join Date: Jul 2002
Location: Michigan (8D4)
Posts: 2,261
hharney is on a distinguished road
It's going to be really difficult to find a DPE for CLT and this is why I have suggested to go get your AMEL rating in a standard twin engine aircraft. This can be done at almost any medium sized flight school. Then you're good to go. The only requirement would be to meet the insurance needs by flying with a qualified Skymaster CFI or mentored by a Skymaster pilot.

I understand that there are some out there that don't want a standard twin rating and just want to seek the CLT limitation. I can appreciate that all the VMC isn't needed for what you desire to do but the market is not going to be very friendly for the CLT only rating, if not pretty much impossible. Pull teeth or just brush up for the AMEL transition

Just my own humble opinion...................
__________________
Herb R Harney
1968 337C

Flying the same Skymaster for 47 years
Reply With Quote
  #7  
Unread 09-13-19, 08:29 PM
TomeHill79 TomeHill79 is offline
Registered User
 
Join Date: Oct 2016
Location: I64
Posts: 82
TomeHill79 is on a distinguished road
Brad Newman DPE @ 16G (Tiffin, OH) with Tiffin Aire will do a Checkride in your Skymaster if you don’t have your multi. He’s done a lot of CLT ratings. It’ll be about $600 for the Checkride.
Reply With Quote
Reply



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is Off
HTML code is Off
Forum Jump


All times are GMT -4. The time now is 02:18 PM.


Powered by vBulletin® Version 3.6.9
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.