parting out 1969 T337D

[Jim Smith]

Louis, let me know if you still have your plane for sale. Jim

[louis@52f]

The airplane is still available and intact, have been talking with some folks in Texas about them taking the entire aircraft, as is, to part out. However, I will be out of town until early November, so any deals made would not be finalized until then at the earliest. Last discussions where in the mid to lower $20k area for the entire thing.

[louis@52f]

The airplane is still available, intact and could ferry, would let the entire thing go for $21k, includes engine logs, prop logs and first two of four airframe logs. I am now advertising the engines and props for sale individually, so this deal expires with the first commitment I get on an engine or prop.
Always hangared for last 22+ years, engines desiccant protected during idle periods.
- Rear Engine, Continental TSIO360AB3 185 Since Factory Reman., July 2002: $18,300.
- Front engine TSIO360A (non VAR) 2589 TT, 1115 SMOH field OH 5/1979, just starting to make metal, good for core,: $4000.
- Rear prop, McCauley D2AF34C61-XMO, blade design SL76C-O, 2589 TT, 644 SMOH @ Byam Propeller Service, Fort Worth Texas. 11/1992: $3,850.
- Front prop, McCauley D2AF34C91-JM, blade design S78C-O, 2589 TT, 679 SMOH @ Southwest Prop. Repair, Arizona City, AZ 6/1991: $3,750
crating and shipping extra.

[louis@52f]

the entire aircraft has been sold, thank you and sorry to all who have shown interest, and thank you to the buyer.!

[cessna337d]

I bought loius s skymaster with the idea of installing the reman engine in mine. Too good of a plane to do that now I am searching for a serviceable tsio360 or var c shaft