Skymaster Forum  

Go Back   Skymaster Forum > Messages
Register FAQ Members List Calendar Today's Posts

Reply
Thread Tools Rate Thread Display Modes
  #1  
Unread 12-09-20, 10:15 PM
hharney's Avatar
hharney hharney is offline
Forum Administrator
 
Join Date: Jul 2002
Location: Michigan (8D4)
Posts: 2,261
hharney is on a distinguished road
Oil Filter Adaptors Service Bulletin

Many of you may have these Oil Filter Adaptors on your engines. I have them on my engines. I have seen problems with these filter adaptors and have seen results of aircraft loosing all oil and making safe emergency landings. This is now a known issue and therefore this Service Bulletin has been released. Look it over closely to be sure the oil filter adaptors are performing correctly.

NTSB is researching this issue and will make some kind of recommendation to the FAA about these adaptors. Originally manufactured by F & M Industries but now owned by Stratus (Tempest)?

I have had no issues with mine since 2009 when I installed them. I will be looking at mine very closely to make sure they look correct.

https://tempestplus.com/wp-content/u...d-12-19-19.pdf
__________________
Herb R Harney
1968 337C

Flying the same Skymaster for 47 years
Reply With Quote
  #2  
Unread 12-10-20, 07:59 PM
Jhogan0101's Avatar
Jhogan0101 Jhogan0101 is offline
Registered User
 
Join Date: Mar 2019
Location: Philadelphia
Posts: 193
Jhogan0101 is on a distinguished road
Thanks Herb👍
__________________
337B
Philadelphia PA
Reply With Quote
  #3  
Unread 12-13-20, 04:59 PM
hharney's Avatar
hharney hharney is offline
Forum Administrator
 
Join Date: Jul 2002
Location: Michigan (8D4)
Posts: 2,261
hharney is on a distinguished road
Some photos of my adapters
Does anyone else have these?
Attached Images
File Type: jpg IMG_8230-1.JPG (720.9 KB, 1176 views)
File Type: jpg IMG_8222 copy.jpg (466.5 KB, 1175 views)
File Type: jpg IMG_8221 copy.jpg (379.8 KB, 1183 views)
__________________
Herb R Harney
1968 337C

Flying the same Skymaster for 47 years
Reply With Quote
  #4  
Unread 12-13-20, 08:15 PM
edasmus edasmus is offline
Registered User
 
Join Date: Nov 2006
Location: ARR - Aurora, IL - USA
Posts: 427
edasmus is on a distinguished road
Send a message via AIM to edasmus
Hi Herb....

My oil adapter on my newly overhauled front engine was the source of the leak we discussed the last time we spoke. I received the email from the FAA discussing this matter and then I forwarded it to my IA. The repair to my front engine adapter had been made just a day or two before the notice arrived in my inbox. My IA responded by saying, "my filter adapter was manufactured for Cessna by Continental Motors." He went on to say. "they have had some problems with thread damage on the adapter and in the engine piece that the adapter screws into and have an AD on certain ones but mine is not included in the AD."

So I guess to answer your question..., I'm not sure what I have other than what I just mentioned. I would also add, based on my recent experience with the adapter on my front engine, if they're leaking, you'll KNOW IT if one is paying any attention at all during preflight or simply looking down at the floor.

Take care,

Ed
Reply With Quote
Reply



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is Off
HTML code is Off
Forum Jump


All times are GMT -4. The time now is 03:19 PM.


Powered by vBulletin® Version 3.6.9
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.