Skymaster Forum  

Go Back   Skymaster Forum > Messages
Register FAQ Members List Calendar Search Today's Posts Mark Forums Read

Reply
Thread Tools Rate Thread Display Modes
  #16  
Unread 02-13-19, 08:24 AM
kilr4d's Avatar
kilr4d kilr4d is offline
Registered User
 
Join Date: Mar 2016
Location: CNC3
Posts: 265
kilr4d is on a distinguished road
Quote:
Originally Posted by edasmus View Post
OK, I was hoping you had the same old probes in the same locations on the new engines as in the old engines. If that were the case, I thought a likely probe issue but that would appear not the case based on your probe swapping attempts.
Also need to check the continuity of the wire from the rear probe to the panel. It's entirely possible it's chafing the way that cyl temp jumps around.

Also should put the factory cht probe on the #1 cyl to confirm temps.
__________________
_________
John K
1977 337G
CNC3
Reply With Quote
Reply


Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is Off
HTML code is Off
Forum Jump


All times are GMT -4. The time now is 01:15 PM.


Powered by vBulletin® Version 3.6.9
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.