Skymaster Forum  

Go Back   Skymaster Forum > Messages
Register FAQ Members List Calendar Search Today's Posts Mark Forums Read

Reply
Thread Tools Rate Thread Display Modes
  #1  
Unread 09-14-20, 04:35 PM
frank.oconnor19 frank.oconnor19 is offline
Registered User
 
Join Date: Feb 2019
Location: KAKH
Posts: 91
frank.oconnor19 is on a distinguished road
Diode Board for Ground Power

The board, 1570043-3 is about as simple as it get, two terminals, two diodes, tied together at a single lug connector. My board is broken, cracked, that can be repaired, but I cannot read the diode numbers, Does anyone know what these are. I have a 1976 P337. The Board number is 1570043-3.

Help?
Reply With Quote
  #2  
Unread 09-14-20, 06:19 PM
mshac's Avatar
mshac mshac is offline
Registered User
 
Join Date: Aug 2020
Location: North Texas
Posts: 746
mshac is on a distinguished road
Quote:
Originally Posted by frank.oconnor19 View Post
The board, 1570043-3 is about as simple as it get, two terminals, two diodes, tied together at a single lug connector. My board is broken, cracked, that can be repaired, but I cannot read the diode numbers, Does anyone know what these are. I have a 1976 P337. The Board number is 1570043-3.

Help?
$4.88 ea on Ebay: https://www.ebay.com/itm/3AF8-ELECTR...r/360623352685

Multi-pack on Amazon: https://www.amazon.com/dp/B07XWXFV34..._f4-xFbTA2J9AR

Don't forget, if you have a fuse for the ground power under the front cowling on the pilot's side, there's a diode in there as well - follow the wire from the bottom of the fuse holder about 3" and it will lead you right to it.

While we're on the subject of ground power, does everyone know its impossible to charge your battery via the ground power receptacle(GPR)? Ground power input and battery circuits are split by a relay. Did you also know that on early models, the GPR will power the starter, but it won't power the avionics?

Last edited by mshac : 09-14-20 at 06:30 PM.
Reply With Quote
  #3  
Unread 09-14-20, 10:28 PM
Learjetter's Avatar
Learjetter Learjetter is offline
Registered User
 
Join Date: Jun 2010
Location: KOKC
Posts: 238
Learjetter is on a distinguished road
Don Nieser has those diode boards. New and used. If I was to do it again, I’d buy an unbroken board from Don and put new diodes from Newark or mouser or amazon on it. Commodore Aerospace.

https://m.facebook.com/CommodoreAerospace/
Reply With Quote
Reply


Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is Off
HTML code is Off
Forum Jump


All times are GMT -4. The time now is 09:33 AM.


Powered by vBulletin® Version 3.6.9
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.