|
Register | FAQ | Members List | Calendar | Today's Posts | Search |
|
Thread Tools | Rate Thread | Display Modes |
#2
|
||||
|
||||
Riley Air Aonditioning Pulley
Hi Lucerne
I just saw your message ( after all these years.... ). If you have been unable to find a pulley, you can try Tim Kasper at Kasper Industries in Gaylord Michigan. He took over all the STCs a few years ago and he provided a pulley to me in 2011. His email address is Tim Kasper <tkasper@kasperind.com>. You may also wish to have a look at your engine mounts. My pulley was damaged when the ( old ) mounts became compressed enough to cause the pressurization relief cable to wear on the belt, and eventually the pulley. Hope this helps. Best Regards,........ Barry Sloane |