|
Register | FAQ | Members List | Calendar | Today's Posts | Search |
|
Thread Tools | Rate Thread | Display Modes |
|
#1
|
|||
|
|||
Sounds like a smart move. Could have anything in any of those passageways. Don’t want to find out with a starved bearing. Check oil cooler in case it also got contaminated. Pushrod tube seal is easy. Been there. Get the tool for the pushrod spring and it’s a snap.
Last edited by wslade2 : 07-18-21 at 11:15 PM. |
#2
|
||||
|
||||
propeller feathering while ground run
Thanks guys for the info. I'm pulling the engine today and installing the old one until I get the overhauled engine checked out.
Appreciate ALL you comments/suggestions! BILLS |