|
|
|||||||
| Register | FAQ | Members List | Calendar | Today's Posts | Search |
 |
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
#2
05-02-17, 05:50 PM
|
||||
|
||||
|
__________________
Herb R Harney 1968 337C Flying the same Skymaster for 47 years 
|
|
#3
05-03-17, 07:21 AM
|
|||
|
|||
|
door trim
Appreciate the feedback but I'm assuming what was in there was some sort of nonstandard retrofit and have not located anything that would work. I found a satisfactory substitute however and may work well for someone else. The foam insulation for hot water pipes - carefully cutting a strip on the adhesive side around 1/2 inch wide worked quite well. The angle and slight curve of the adhesive side fit well and solved the problem.
|
Hybrid Mode
