|
Register | FAQ | Members List | Calendar | Today's Posts | Search |
|
Thread Tools | Rate Thread | Display Modes |
|
#1
|
||||
|
||||
Alain,
I removed all the old gauges when I installed 2xGi-275 as EIS 2 years ago. I also installed CiES fuel senders and display fuel quantity on the GI-275. You need new probes for MP, RPM, oil P, oil T, fuel quantity, fuel flow, fuel pressure. The G3X sensor kit for 6 cyl engine has most of them. Read all three GI275 installation manuals to get the full scope of the install. -LJ Last edited by Learjetter : 04-29-24 at 07:31 PM. |
#2
|
|||
|
|||
Hello
Thanks for your answer. Sorry for my ignorance ... but what is the CiES fuel senders and display you installed ... The GI 275 EIS face their own display no ?
__________________
Alain +41 79 266 2000 www.evazion.ch www.osud.ch www.Whitepod.com www.purplewings.ch |
#3
|
||||
|
||||
CiES is a company that makes digital fuel level float sensors. I thought since I was putting all new sensors in for the digital gauges I might as well include fuel quantity.
https://ciescorp.net/ |
#4
|
|||
|
|||
You mentioned stec 55x. Is it already in the plane? Or are you doing new installation? If new installation, where are you sourcing it from?
|