|
|
|||||||
| Register | FAQ | Members List | Calendar | Today's Posts | Search |
 |
| Thread Tools | Rate Thread | Display Modes |
|
#1
|
|||
|
|||
|
Fuel Tank Gaskets Available
Fuel tank gaskets, under the fuel probe plate, available made from Viton Grade A material.
The originals made out of a composite cork compound do not hold their shape etc. Cessna's price on these gaskets is right at 300.00 each today. Depending on your aircraft your tanks use a total of 4 or 6 of these gaskets. On my aircraft I have also cut a 30 degree (60 degree conical) countersink in the fuel probe plate and have installed a vition oring under the small washers to seal the bolts from leaking. The gasket that I have available is p/n SE 1516118-1, grade A Viton, owner produced, 49.00 dollars each. Dan N67S picture to follow. 
|
|
#3
12-30-20, 10:01 PM
|
|||
|
|||
|
I am right in the middle of going through my tanks and there is no way i’m paying $1200 for bad gaskets when I can replace with a whole kit from cies for 2400, which includes gaskets. May be interested in this though.
|
|
#4
01-03-21, 03:19 PM
|
|||
|
|||
|
|
Linear Mode
