|
Register | FAQ | Members List | Calendar | Today's Posts | Search |
|
Thread Tools | Rate Thread | Display Modes |
|
#1
|
|||
|
|||
Fixed?
Bill,
Have you solved the issue? I just finished rigging my flaps (C337A) as the previous owner/maintainer had taken a short cut in rigging...anyway... Once I finished rigging the flaps, I went through and checked the elevator trim and interconnect rigging and had to make some slight adjustment. I have everything working - just wanted to see if you did too - or if we put our heads together to solve yours. Jeff |
#2
|
||||
|
||||
Interconnected elevator trim to flaps
JAG.
Yes, thank you, I did fix the flaps/interconnected elevator trim. I had to go through it several times, but I finished with only one dimension (angle of degree) full down elevator trim is off by about 3 degrees. I tried removing the connecting rod and adjust it but it's off 3 degrees the opposite way? It works/flys fine. Thanks again for asking. By the way I was down in the great state of Texas a few months ago for a visit-it was great to be back HOME!! Regards, BILLS |