Skymaster Forum  

Go Back   Skymaster Forum > Messages
Register FAQ Members List Calendar Today's Posts

 
 
Thread Tools Rate Thread Display Modes
Prev Previous Post   Next Post Next
  #11  
Unread 08-07-02, 10:53 AM
Mitch Taylor Mitch Taylor is offline
Member
 
Join Date: Jun 2002
Location: Los Angeles
Posts: 52
Mitch Taylor is an unknown quantity at this point
Skyking:

What did the dipstick read after you added 7 quarts and ran the engine a little while? My dipsticks read a quart lower than what's actually in the engines. If I have seven quarts in the engines (stick reads 6) oil use is about 1 quart per 9 hours. If I run at 7 on the dipstick, I get oil out the breather, and lose that top quart very quickly. You should check the stick right after changing the oil and doing a runup. Let it stand overnight and check it again, as you'll probably see at least half a quart more after standing overnight. Now you'll have a better idea in any given situation how much oil is actually in the engines.

Mitch
N5251Z (O-2A)
Reply With Quote
 



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is Off
HTML code is Off
Forum Jump


All times are GMT -4. The time now is 01:02 PM.


Powered by vBulletin® Version 3.6.9
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.