![]() |
|
Register | FAQ | Members List | Calendar | Search | Today's Posts | Mark Forums Read |
![]() |
|
Thread Tools | Rate Thread | Display Modes |
|
#1
|
|||
|
|||
Fuel Guages
We have used the CESI ditigal senders on our 421B and C337G w/excellent results
|
#2
|
|||
|
|||
On your G, did you use two or four of the CIES senders?
|
#3
|
|||
|
|||
I believe we used 4
|
#4
|
|||
|
|||
Tim
After I had the box overhauled mine worked fine. Dan |
#5
|
|||
|
|||
where did you have the box overhauled?
|
#6
|
|||
|
|||
When you had the probes installed, we’re you able to work through the access plates or did you have to remove the upper wing panels on the 337?
|
#7
|
|||
|
|||
Our A&P had to open up the wings (after supporting them) to replace two senders in each main tank, and remove the Flint tip tanks to replace the sender in those.
Last edited by GearUp : 10-04-21 at 04:14 PM. |
#8
|
|||
|
|||
Tech Aire was the place that I had the unit overhauled
|
![]() |
Thread Tools | |
Display Modes | Rate This Thread |
|
|