|
|
|||||||
| Register | FAQ | Members List | Calendar | Search | Today's Posts | Mark Forums Read |
|
|
Thread Tools | Rate Thread | Display Modes |
|
#3
12-28-20, 11:14 AM
|
||||
|
||||
|
Broken Entry Step
GAdams. Had the same problem. Removed the step took it to a certified local (Non-aviation) welder. He ground around the break, TIG or MIG welded the break THEN HE FITTED/WELDED A DOUBLER AROUND THE WHOLE BREAK. I re-attached the step with heavier rivets and it's works/looks fine!
|
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Threaded Mode