|
|
|||||||
| Register | FAQ | Members List | Calendar | Search | Today's Posts | Mark Forums Read |
|
|
Thread Tools | Rate Thread | Display Modes |
|
#6
03-02-20, 09:19 AM
|
|||
|
|||
|
I have been studying the valve drawings and come to the same conclusion myself about either corrosion (most likely) or some grit stuck in the ball/seat area. Also, been doing some research and B&S in Wichita is on my call list.
|
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Threaded Mode