|
|
|||||||
| Register | FAQ | Members List | Calendar | Search | Today's Posts | Mark Forums Read |
 |
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
#1
|
||||
|
||||
|
During the "clean-up" phase, they removed just over 27 lbs of wire that was just left behind with the previous avionics install. I flew around with 27 lbs of dead weight!!
This picture shows the heap of wire that was left over AFTER they already filled an apple box with wires, connectors etc.
__________________
To the Blue Room!! Jakes Dekker Last edited by gkey : 11-10-08 at 07:55 PM. Reason: Spelling (again) 
|
|
#2
11-10-08, 08:02 PM
|
||||
|
||||
|
Just got word back on my S-Tec 55. The good news is that I do not need to buy a new A/P; they could fix mine. (Yahoo!!).
But they did find about half a dozen problems. I still have to find out what these problems were exactly, but one was that I fried the resistors on the ALT and pitch during a very turbulent flight (will NEVER do that again!). I understand they loaded it with a newer version software as well. Oh, and they cleaned up the LCD display. Cost? $600. What a relief...
__________________
To the Blue Room!! Jakes Dekker
|
|
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Hybrid Mode
