crashed - Skymaster Forum

rick bell crashed 02-15-10, 06:12 PM

hharney http://www.nj.com/news/index.s... 02-15-10, 06:50 PM

Skymaster337B If you watch the video you'll... 02-15-10, 07:59 PM

Roger Terrible . Hard to surmise... 02-15-10, 08:43 PM

Guy Paris P337 02-15-10, 10:19 PM

hharney Reports are saying now that... 02-15-10, 11:08 PM

wfreestone It appears that it probably... 02-16-10, 12:50 PM

hharney I keep wondering if they were... 02-18-10, 02:08 PM

jack374dn Did this aircraft have the... 02-18-10, 09:20 PM

hharney I don't know which optional... 02-18-10, 09:34 PM

jack374dn Thanks Herb .... Jack 02-18-10, 09:53 PM

birddog Has there been a report... 02-21-10, 08:54 PM

hharney Millville/Eagle Nest Accident 02-21-10, 09:29 PM

Skymaster337B Wow, a fuel thing. Seems to... 02-23-10, 01:59 AM

hharney I like to use my aux tanks as... 02-23-10, 09:46 AM

birddog Thanks for the information.... 02-23-10, 03:19 PM

hharney NTSB Report Posted 02-23-10, 05:41 PM

WebMaster Sad incident, but I find it... 02-24-10, 05:27 AM

WebMaster Lets do a little Math 02-24-10, 06:22 AM

Roger NY preliminary NTSB 02-24-10, 06:39 AM

jack374dn According to the NTSB the... 02-24-10, 07:43 AM

hharney Media Report On The Ntsb... 02-24-10, 02:14 PM

WebMaster I don't know if it is... 02-24-10, 05:26 PM

Guest See attached diagram for wing... 02-24-10, 10:23 PM

edasmus "The last contact was at... 02-24-10, 11:34 PM

Roger The math would be as follows:... 02-25-10, 12:29 AM

Skymaster337B Even if the aircraft exceeded... 02-25-10, 02:36 AM

edasmus Your comment sounds logical... 02-25-10, 09:38 AM

Skymaster337B I don't believe the... 02-25-10, 09:57 AM

Roger A 4500lb car travelling at... 02-25-10, 11:05 AM

CO_Skymaster It is possible, in that last... 02-25-10, 09:32 PM

Kim Geyer I think at wing station 177... 02-26-10, 12:02 AM

Ron Moore It's important to remember... 02-26-10, 10:56 AM

hharney Pressurized G model POH... 02-26-10, 11:14 AM

Ron Moore Understood. But, 3.8 is... 02-26-10, 11:43 AM

Roger In fact isn't the whole idea... 02-26-10, 12:26 PM

hharney Just for a visual, here is... 02-26-10, 01:58 PM

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts vB code is On Smilies are On [IMG] code is Off HTML code is Off

All times are GMT -4. The time now is 02:00 PM.