Complete interior re-furbish

hharney Complete interior re-furbish 11-10-08, 10:57 PM

stackj Go for the tinted windshield.... 11-10-08, 11:26 PM

gkey I think if you ask 10 guys... 11-11-08, 02:02 AM

hharney Jim/Jakes, you are probably... 11-12-08, 04:17 PM

gkey Herb, On my 172 I have... 11-12-08, 09:06 PM

Dale Campbell Windshield 11-13-08, 10:01 AM

hharney Thanks for all the info gkey... 11-16-08, 04:57 PM

gkey Herb, Take a look at what my... 11-16-08, 07:42 PM

Dale Campbell Headliner 11-17-08, 10:53 AM

hharney Dale/Jakes Looks nice,... 11-17-08, 11:45 PM

Guy Paris Modifications: 11-18-08, 11:31 AM

hharney Ray does not have that option... 11-21-08, 08:01 PM

n86121 Airtex makes a perfectly good... 11-23-08, 01:17 PM

hharney On going project update 12-01-08, 08:33 PM

JeffAxel Herb I noticed on the shot of... 12-01-08, 10:33 PM

WebMaster Nice pictures The panel... 12-02-08, 11:00 AM

hharney Thanks Jeff I will take a... 12-02-08, 05:53 PM

JeffAxel Herb, That looks like the... 12-02-08, 09:02 PM

Guy Paris SoundEx Products 12-03-08, 11:46 AM

hharney Another day in paradise, snow... 12-05-08, 04:45 PM

hharney Hydraulic Lines on Mains 12-05-08, 04:54 PM

JeffAxel Herb, there were plenty of... 12-06-08, 12:20 AM

billsheila Replace the hoses 12-07-08, 03:42 PM

Dale Campbell Hydralic lines 12-08-08, 08:50 AM

hharney Good advice, it will be done.... 12-09-08, 07:58 AM

Dave Underwood I have used Precision Hose... 12-09-08, 09:00 AM

sgmret On the first Skymaster I... 12-09-08, 10:02 AM

rmorris Pht 12-09-08, 05:21 PM

stackj Herb, I chased an oil leak... 12-09-08, 06:47 PM

WebMaster That's two votes for the... 12-10-08, 04:47 AM

Dale Campbell Gear Hoses 12-10-08, 08:32 AM

hharney This is fun! 12-10-08, 11:49 AM

stackj Herb, Before you drill any... 12-10-08, 12:07 PM

hharney Jim, yeah buddy on the... 12-10-08, 03:15 PM

hharney More photos from Larry at... 12-10-08, 03:18 PM

travis late in the game 12-12-08, 01:06 PM

hharney Here are a couple of photos... 12-19-08, 10:41 PM

hharney Before Christmas break we... 01-01-09, 01:03 PM

hharney Photos described above 01-01-09, 01:07 PM

skymstr02 The slots are there to... 01-01-09, 03:26 PM

hharney Other windshields have holes... 01-01-09, 08:31 PM

skymstr02 All Cessna installed... 01-01-09, 09:04 PM

hharney Here are some more photos of... 01-02-09, 10:49 AM

skymstr02 You should have that wing... 01-02-09, 02:42 PM

hharney Thanks for the tip, the... 01-07-09, 03:26 PM

hharney Now that I just spent 2 days... 01-11-09, 04:20 PM

hharney Fuel tank photos Well, last... 01-11-09, 04:31 PM

skymstr02 Thanks for the update. Keep... 01-11-09, 08:31 PM

WebMaster Thank you. You are always... 01-13-09, 10:12 AM

stackj Fuel Tank Repair 01-13-09, 11:08 PM

skymstr02 For the air pressure, I use... 01-14-09, 05:23 AM

WebMaster Jim, Larry Bowdish 10292... 01-14-09, 02:31 PM

Pete Somers Hey Larry maybe I should make... 01-14-09, 04:07 PM

hharney Jim / Skymstr 02 Thanks for... 01-15-09, 11:01 AM

stackj Slow moving Cork 01-16-09, 12:46 AM

hharney Jim, I was able to use the... 01-23-09, 09:25 AM

hharney Windshield install horror 01-23-09, 09:31 AM

skymstr02 Herb, You may want to... 01-23-09, 06:55 PM

stackj All Right! 01-23-09, 11:24 PM

hharney Well it has been a busy week... 01-25-09, 09:21 PM

hharney Side windows with rubber... 01-25-09, 09:24 PM

hharney Pain in the A_ _ entry door... 01-25-09, 09:25 PM

skymstr02 Its looking real good there! ... 01-26-09, 11:58 PM

skymstr02 Herb, any updates???? ... 02-06-09, 06:31 AM

hharney I have been on assignment in... 02-06-09, 08:39 AM

hharney Back to work in Kalamazoo 02-07-09, 09:39 PM

hharney In a earlier post I had... 02-07-09, 10:04 PM

hharney The interior is starting to... 02-07-09, 10:14 PM

skymstr02 All of the sheet metal parts... 02-08-09, 05:43 AM

hharney That would make sense,... 02-08-09, 09:29 AM

SteveG Hi Herb, The project is... 02-08-09, 04:41 PM

hharney There were very few places of... 02-08-09, 10:06 PM

SteveG Having sprayed CorrosionX... 02-09-09, 09:39 AM

WebMaster BoShield goes on as a fog,... 02-09-09, 01:18 PM

hharney Steve you are so right about... 02-12-09, 06:54 PM

hharney Here is the progress report... 02-15-09, 09:10 AM

hharney Interior Progress 02-15-09, 09:14 AM

hharney Hours and hours of cleaning... 02-15-09, 09:20 AM

Ernie Martin I know you didn't ask for a... 02-15-09, 11:34 AM

skymstr02 I'm with Ernie on this... 02-15-09, 12:04 PM

WebMaster Paint Scheme on the left. No... 02-15-09, 12:37 PM

billsheila Agreed. Go left young man 02-15-09, 04:38 PM

hharney Well that got some action... 02-15-09, 06:43 PM

Todd Gessel Sorry to disagree, but my... 02-15-09, 09:16 PM

JeffAxel I agree with Todd, I prefer... 02-16-09, 02:45 AM

hharney Yes the MT's are approved for... 02-16-09, 10:14 AM

Dale Campbell Paint Scheme 02-16-09, 11:22 AM

Ernie Martin Not that I'm trying to lobby... 02-16-09, 12:30 PM

WebMaster Me too, Ernie. I think the... 02-16-09, 10:55 PM

SteveG The curvilinear trim of the... 02-17-09, 08:32 AM

Todd Gessel I concur with Steve. The... 02-17-09, 07:30 PM

hharney Attached is a word file that... 02-17-09, 10:12 PM

Dale Campbell Paint scheme 02-18-09, 08:37 AM

WebMaster I think No 3 is HOT!! 02-18-09, 03:56 PM

hharney Thanks for all the input on... 02-26-09, 11:36 AM

gkey Herb, As you may recall, I... 02-26-09, 12:24 PM

SteveG I installed the Rosen visors... 02-26-09, 04:28 PM

skymstr02 Part of the Horton STOL STC... 02-26-09, 07:45 PM

hharney Wing tips w/ winglets are... 02-26-09, 11:09 PM

hharney Seats and Carpet What more... 02-28-09, 10:32 PM

WebMaster I wouldn't let anyone sit in... 03-01-09, 04:52 PM

skymstr02 I like it! And I agree, I... 03-02-09, 05:56 AM

WebMaster That's what I meant!! :D :D... 03-03-09, 11:02 AM

WebMaster Herb has been busy, and gone,... 03-11-09, 09:55 PM

WebMaster Here's a picture of the strut... 03-11-09, 10:04 PM

hharney To the Paint Shop 03-16-09, 11:17 PM

gkey Herb, Wonderful job. If I... 03-17-09, 12:10 AM

hharney Winglets 03-18-09, 09:15 PM

gkey Thanks, Herb. Now, if... 03-18-09, 09:31 PM