|
Register | FAQ | Members List | Calendar | Today's Posts | Search |
|
Thread Tools | Rate Thread | Display Modes |
#1
|
||||
|
||||
Main Gear Downlock switch didn't work
While flying today, the main gears came down but the switches did not engage. Landed without incident, but...
What I found was both main gear down switch lever arms slid under the main gear arm -- it should just butt up against it, not go under it. The only thing I did to cause this was put grease around the down lock itself. So I guess it caused the switch arm to slide under the landing gear arm. Anyone every see anything like this? Now I'm worried about a repeate, but as far as I can tell the switches themselves can not be adjusted. Any idea? |