|
Register | FAQ | Members List | Calendar | Search | Today's Posts | Mark Forums Read |
|
Thread Tools | Rate Thread | Display Modes |
#4
|
|||
|
|||
More than likely is that you've got a blown diode on the little signal processing board on the top center of your firewall. Or possibly a bad relay on the same board. The diodes are very easy to replace. I would disconnect them one at a time and check them first. There are a total of 4 of them, 2 for the front engine, and 2 for the rear engine circuits. There is one relay for each circuit. There is also a fuse for each circuit.
__________________
Mark Hislop N37E |
Thread Tools | |
Display Modes | Rate This Thread |
|
|