|
|
|||||||
| Register | FAQ | Members List | Calendar | Today's Posts | Search |
 |
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
#1
|
|||
|
|||
|
337 mods installed
If anyone is interrested I work for a small company in Deland Florida. We just completed our third 337 today. We install the Horton STOL kits and the RT gear door delete kits. We also make and install Kydex interior panels, as well as dye the exsisting plastic trim to match. Out interiors are basic utility type. Please email me direct for more info. Thank you !
|
|
#2
12-11-02, 09:19 PM
|
|||
|
|||
|
We re-skin
Hi again, just an update, we delivered our third 337 today.
She was a beauty!! I'll have pictures to post soon. Currently we are working on re-skinning the flight controls for a 337 that crashed in Columbia. We also modify older wing spars that have the small radius at the attach point. We offer many services, just tell us what you're wanting to do. Please e-mail me direct with any questions or comments.
|
|
#3
01-18-03, 07:46 AM
|
|||
|
|||
|
Installing FLIR for law enforcement
This week we got in a 1968 337 from a sheriff's department here in Florida. They want a FLIR (forward looking infra red)
system installed. My boss designed the beef-up for the leading edge some years ago for another customer. Two additional ribs are formed and installed on either side of an exsisting rib. Then the dove tail mount for the FLIR ball is attached to the leading edge, fastened to the three ribs. Any questions e-mail me direct. Kevin Airframe Specialities Inc. Deland Florida
|
Hybrid Mode
