|
|
|||||||
| Register | FAQ | Members List | Calendar | Today's Posts | Search |
 |
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
#1
|
||||
|
||||
|
Looking for a Pitot heater
Still looking. Has anyone else had any success?
Hi everyone, I am looking for a Pitot heater element OR THE ENTIRE ASSEMBLY. Part number 6653465-003 OR 1500118-4 PITOT HEAD ASSEMBLY It is for my 1973 337G 33701518. It is for the internal one that is in the strut Does anyone have one they coud sell to me? Thanks, Gord
__________________
Gord C-FTES Last edited by Gord Tessier : 06-15-19 at 10:12 AM. 
|
|
#2
06-25-17, 03:23 PM
|
||||
|
||||
|
Hi Gord,
Not sure if you've looked, but we found one wire was off mine when we pulled the upper wing root fairing for the annual. New connector; plugged it and works like a charm. -John
__________________
_________ John K 1977 337G CNC3
|
|
#3
01-29-18, 09:09 PM
|
||||
|
||||
|
Help!!
I am in need of the same thing, same P/N.
Turns out my heating element(s?) are missing, and the wire has been capped/stowed. I assume I also need the little thermostat deal-ie-oh on the bottom? (Refer old thread for extra pics) http://www.337skymaster.com/messages...read.php?t=617 Leighton. Last edited by LostKiwi : 01-29-18 at 09:16 PM.
|
|
#4
08-01-20, 01:17 AM
|
||||
|
||||
|
Heated Pitot Assy
Did anyone ever locate a source for these?
|
|
#5
08-02-20, 10:09 PM
|
||||
|
||||
|
__________________
Herb R Harney 1968 337C Flying the same Skymaster for 47 years
|
|
#6
09-17-20, 12:29 PM
|
||||
|
||||
|
So Cessna wants $1324 for a heating element? You may want to consider going the "owner produced part" route. The laws of electricity aren't any different just because its an aircraft part. There is a wire, or coil, that has a specified length and resistance, to produce a specified amount of heat at 28 volts dc input. These values may be obtained, and copied by the owner to produce his own replacement part.
Here's a good discussion on making your aircraft parts (or having them made for you, which is also legal): https://aviation.stackexchange.com/q...aa-regulations Reach out to this company about building one for you custom: https://intekcorp.com/custom-heating-elements/ Finally, have you called all the airplane Junkyards? Off the top of my head: 1. Air Salvage of Dallas (ASOD) 2. Texas Air Salvage 3. White Industries Air Salvage 4. Dodson Air Salvage - There are many more smaller ones too. #2 Texas Air Salvage has a 337 on their website currently being parted out: https://www.texasairsalvage.com/Airc...php?editid1=34 Let us know how you solve the issue! Last edited by mshac : 09-17-20 at 12:40 PM.
|
Hybrid Mode
