Skymaster Forum  

Go Back   Skymaster Forum > Messages
Register FAQ Members List Calendar Today's Posts

Reply
 
Thread Tools Rate Thread Display Modes
  #1  
Unread 11-10-21, 05:29 PM
YankeeClipper's Avatar
YankeeClipper YankeeClipper is offline
Registered User
 
Join Date: Apr 2013
Location: CT
Posts: 262
YankeeClipper is on a distinguished road
CFI's with Time in Type in the Northeast?

Apologies if this should be in the resources section, but wasn't sure if that's more for posting info, less for cluttering with requests.

Has anyone recently come across a CFI between NJ and Maine that could provide some time for my local CFI? Would be happy to use their plane or mine, as preferred.
Reply With Quote
  #2  
Unread 11-11-21, 04:39 PM
TomM's Avatar
TomM TomM is offline
Registered User
 
Join Date: Jan 2020
Location: Iowa
Posts: 126
TomM is on a distinguished road
Ohio CFI

New Jersey to central Maine is about 440 miles. Tiffen OH is about 440 miles from NJ and Brad Newman with Tiffen Aire is a CFI with time in the Skymaster as well as a DPE who will do a center thrust check ride. I used him in the DPE role a year and a half ago when I got my ME rating, he is a great guy based on my experience. Might be worth a check.
Reply With Quote
  #3  
Unread 11-12-21, 12:40 AM
wslade2 wslade2 is offline
Registered User
 
Join Date: Feb 2016
Location: none
Posts: 303
wslade2 is on a distinguished road
So did you get a centerline thrust endorsement? I thought I was told that’s not recognized anymore.
Reply With Quote
  #4  
Unread 11-12-21, 08:16 AM
YankeeClipper's Avatar
YankeeClipper YankeeClipper is offline
Registered User
 
Join Date: Apr 2013
Location: CT
Posts: 262
YankeeClipper is on a distinguished road
From the ACS for private pilots, updated 6.6.19:

Removal of the “Limited to Center Thrust” Limitation

The “Limited to Center Thrust” limitation for the AMEL rating is issued to applicants who complete the practical test for the AMEL rating in an aircraft that does not have a manufacturer’s published VMC. When conducting a practical test for the purpose of removing the “Limited to Center Thrust” limitation from the AMEL rating, the applicant must be tested on the multiengine Tasks identified in the table below in a multiengine airplane that has a manufacturer’s published VMC speed. This speed would be found on the type certificate data sheet (TCDS) or in the AFM. If the limitation will be removed under parts 121, 135, or 142, it must be done in accordance with an approved curriculum or training program. An applicant who holds an airplane instrument rating and has not demonstrated instrument proficiency in a multiengine airplane with a published VMC shall complete the additional Tasks listed under Removal of the “Airplane Multiengine VFR Only” Limitation section
Reply With Quote
  #5  
Unread 11-30-21, 09:05 PM
rhurt's Avatar
rhurt rhurt is offline
Registered User
 
Join Date: Aug 2008
Location: Nashville
Posts: 80
rhurt is on a distinguished road
A good guy in NJ is Tom Kramer at Sky Manor airport (N40). He runs a flight school and has 337 time.

I do quite a bit of Skymaster instruction, but live in Nashville. Willing to travel though...
Reply With Quote
  #6  
Unread 04-23-23, 12:43 PM
Joes Joes is offline
Registered User
 
Join Date: Dec 2021
Location: Abingdon, VA
Posts: 80
Joes is on a distinguished road
Looking for CFII

I currently have a instrument rating for single engine land, would like to find someone for a instrument checkride to include on my mel clt rating. Any help would be appreciated.
Reply With Quote
  #7  
Unread 09-20-24, 07:14 AM
MtWings MtWings is offline
Registered User
 
Join Date: Oct 2020
Location: South Carolina
Posts: 2
MtWings is on a distinguished road
Quote:
Originally Posted by YankeeClipper View Post
Apologies if this should be in the resources section, but wasn't sure if that's more for posting info, less for cluttering with requests.

Has anyone recently come across a CFI between NJ and Maine that could provide some time for my local CFI? Would be happy to use their plane or mine, as preferred.
I am in South Carolina and working on my MEI. When I finish I can come up possibly.
Reply With Quote
Reply



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is Off
HTML code is Off
Forum Jump


All times are GMT -4. The time now is 01:55 PM.


Powered by vBulletin® Version 3.6.9
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.