Skymaster Forum  

Go Back   Skymaster Forum > Messages
Register FAQ Members List Calendar Today's Posts

Reply
Thread Tools Rate Thread Display Modes
  #1  
Unread 09-29-24, 12:12 PM
mdrob1985's Avatar
mdrob1985 mdrob1985 is offline
Registered User
 
Join Date: Jul 2024
Location: South Texas
Posts: 6
mdrob1985 is on a distinguished road
DeltaHawk DHK235A4 survey

Dusting off an old topic. Deltahawk engines came out with news this year that they are currently seeking approval for a 235 hp variant on their Jet A (diesel) for cylinder. Their design looks very straightforward and low maintenance. It should have a great TBO if/when approved. They are currently doing a survey to see what platforms to pursue. http://deltahawk.com/survey They are looking at an installed price point of $110K. That's higher than a rebuilt Continental, not higher than a new one, if you can even get one. It would just be good to have a lower emission, lower maintenance and longer life solution to the 360's. Competition certainly would not hurt the current engine pricing. There are hybrid electric alternatives being tested in a 337 platform and Deltahawk is promoting this as a potential partner to the electric engine that part of that. I plan to fly this thing until I can no longer get duct tape to hold the wings on,
so it's not a sunk cost issue for me. I need a long life, efficient solution. Any thoughts?
Reply With Quote
  #2  
Unread Yesterday, 04:27 PM
Learjetter's Avatar
Learjetter Learjetter is offline
Registered User
 
Join Date: Jun 2010
Location: KOKC
Posts: 260
Learjetter is on a distinguished road
Some outfit is slow-rolling 200HP turbines, at $80k, and promising wide STC applicability. If they demonstrate one, and prove it’s not “vaporware” I’d be way more interested in turbines than newer piston technology.
Https://turb.aero
Reply With Quote
  #3  
Unread Yesterday, 11:51 PM
mdrob1985's Avatar
mdrob1985 mdrob1985 is offline
Registered User
 
Join Date: Jul 2024
Location: South Texas
Posts: 6
mdrob1985 is on a distinguished road
The guys at Deltahawk already have an STC for their 180hp platform and will be getting it for 200hp & 235hp, expected at any time. They are a US based company. I am suspect of the Australian firm getting an STC with a turbine. That would likely remove a 20K ceiling restriction we have on them now and require a high altitude endorsement. I would also not want to give up 50hp over what I have now. I'd gain another 20hp with the DHK variant and long service life. No electronics and way fewer moving components to fail. I think it will be well received across the entire GA spectrum. If Cali keeps pushing their no emissions agenda, you won't be able to buy AV gas at some point and will be forced to find alternative fuel pistons. It would be cool on startup though to have the turbine. I just don't see that one happening anytime soon.

Last edited by mdrob1985 : Yesterday at 11:51 PM. Reason: typo
Reply With Quote
  #4  
Unread Today, 07:30 AM
Galvine Galvine is offline
Registered User
 
Join Date: Jun 2023
Location: KFSD
Posts: 25
Galvine is on a distinguished road
I am interested in the Deltahawk.
Thx

Greg
Reply With Quote
Reply



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is Off
HTML code is Off
Forum Jump


All times are GMT -4. The time now is 09:26 AM.


Powered by vBulletin® Version 3.6.9
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.