Parts - needed

SkyMac · #1 09-25-11, 08:17 PM

Hi Everyone

Whilst I'm still chasing a front and rear spinner PN:1557303-13 (front Spinner)
PN: 1457306-5 (rear spinner)

I have an need for a couple of other items.

I would like to replace the right hand wing strut fairing, mine has a few small cracks emanating from the screw holes and has been patched previously PN:1521001-22

The other component / fairing I am chasing is fixed to the left wing and is part of the boom fairings. This particular fairing is the left hand inner PN: 1500005-27
Mine was damaged due to siezed screws at the time of dissasembly.

Have sent Don Nieser an email, just waiting for a reply to see what he has. as well as a number of the salvage yards.

Regards
David

PS: Larry many thanks for tending the garden to ensure this forum continues to be a place of benefit to all.

Kim Geyer · #2 09-27-11, 05:02 PM

David
You can try
planeplastics.com
buyplaneparts.com
globefiberglass.com
steneaviation.com
Hope it helps
Kim

SkyMac · #3 09-27-11, 09:06 PM

Hi Kim

Many thanks, every bit of information helps when it comes to chasing down parts.

Regards
David

FRED MARQUEZ · #4 11-15-11, 02:40 PM

I have both front and rear let me know if you still want them

turbofrix@hotmail.com

regards
Manuel

SkyMac · #5 01-17-12, 02:53 AM

Hi Everyone

Happy New to each of you, work is progressing well on the old 337G and I have secured many of the parts I have been chasing.

However I am still looking for a L/H inner boom fairing that is attached to the wing (PN : 1500005-27). Screw attachment holes on mine have been elongated, I could patch but I choose not to, I would rather replace.

What I am hoping is that a member has or know's of a unserviceable L/H 73 to 76 "G" model wing that I could obtain this part off. I have spoken to Don previously without success as well as Preffered, Yingling and many others.

Regards
Dave

edasmus · #6 01-17-12, 02:09 PM

Check under "Parts Sources" on this website. User "mhudsonbsme" is parting out a 1973 337G. Send him a private message as well as a post on his thread. He recently responded to me via email for some parts that I was seeking. I gave him my email via the private message. Maybe he has what you need.

Good Luck,

Ed

SkyMac · #7 01-17-12, 05:19 PM

Hi Ed

Thanks for your reply, I have visited Mike in Nth Carolina during trips to the USA last year and have secured many parts. Unfortunatley the part I am looking for was damaged on the wing Mike has.

Again appreciate the assistance.

Dave