Skymaster Forum  

Go Back   Skymaster Forum > Mechanics and Service Providers
Register FAQ Members List Calendar Today's Posts

Reply
Thread Tools Rate Thread Display Modes
  #1  
Unread 02-02-09, 10:09 PM
Todd Gessel's Avatar
Todd Gessel Todd Gessel is offline
Registered User
 
Join Date: Jan 2009
Location: Arizona
Posts: 36
Todd Gessel is on a distinguished road
Best Skymaster gear expert?

I have a '77 33G, non-turbo, non-pressurized. The left main gear is not locking into place as it seems the locking actuator is extending before the gear is in full down position and is hitting the extended actuator, thus preventing it from moving into place.

Does anyone know who the worlds best Skymaster gear expert is?

Thanks,

Todd
Phoenix, Arizona (however, the plane is currently in SE Texas)
Reply With Quote
  #2  
Unread 02-03-09, 08:24 PM
JeffAxel JeffAxel is offline
Registered User
 
Join Date: Mar 2007
Location: Portland, Oregon
Posts: 150
JeffAxel is an unknown quantity at this point
if you are a Cessna Pilots Assoc. member, give Tom Carr a call at www.Cessna.org.
He is one of the most knowledgeable Skymaster guys I have met!
Reply With Quote
  #3  
Unread 02-05-09, 11:07 PM
stackj stackj is offline
Registered User
 
Join Date: Apr 2002
Location: Richmond, VA
Posts: 311
stackj is an unknown quantity at this point
Send a message via AIM to stackj
No Expert

Todd,

I'm no expert on the gear, but I know you can extend/retract the gear using the hand pump instead of a mule. This may slow down the operation so you can see exactly what is going on.

Good Luck


By the way... Don Nieser has a pretty good grasp of the skymaster systems. He usually sells us parts but knows the airframe pretty well too.
__________________
Jim Stack
Richmond, VA
Reply With Quote
  #4  
Unread 02-06-09, 08:46 AM
hharney's Avatar
hharney hharney is offline
Forum Administrator
 
Join Date: Jul 2002
Location: Michigan (8D4)
Posts: 2,261
hharney is on a distinguished road
Just a word of caution; do not over use the hand pump. It can actually increase the pressure that the system normally sees and it is made to use in emergencies only. Like any componant in the aircraft it has a life cycle. I don't think you want to shorten the life of that pericular componant.
__________________
Herb R Harney
1968 337C

Flying the same Skymaster for 47 years
Reply With Quote
  #5  
Unread 02-09-09, 04:45 PM
Todd Gessel's Avatar
Todd Gessel Todd Gessel is offline
Registered User
 
Join Date: Jan 2009
Location: Arizona
Posts: 36
Todd Gessel is on a distinguished road
I want to thank everyone for the help. The mechanic worked on it some more and found that the hydraulic hoses were routed in a way that caused the problem. A slight adjustment to the location of the hose routing seems to have corrected the problem.
Reply With Quote
  #6  
Unread 04-07-09, 11:50 AM
Dave Underwood Dave Underwood is offline
N456TL
 
Join Date: May 2002
Location: England
Posts: 167
Dave Underwood is on a distinguished road
The routing of the hoses is the problem. You want the hoses positioned so down locks are held in the up position until the gear strikes them and causes them to start to swing. At that time the movement opens a valve and causes them to pressurize and lock down.

If the locks start to pressurize too early you will have problems.

Good luck.
Reply With Quote
Reply



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is Off
HTML code is Off
Forum Jump


All times are GMT -4. The time now is 07:13 PM.


Powered by vBulletin® Version 3.6.9
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.