Skymaster Forum  

Go Back   Skymaster Forum > Parts Sources
Register FAQ Members List Calendar Today's Posts

Reply
Thread Tools Rate Thread Display Modes
  #1  
Unread 06-17-24, 04:19 PM
cbxmike cbxmike is offline
Registered User
 
Join Date: Aug 2014
Location: Atlanta
Posts: 16
cbxmike is on a distinguished road
Question Does Anyone else have an A/C STC?

I’m looking for the correct replacement belt for the Aviation Enterprises (Owen Bell) STC. On the paperwork it gives an odd four letter code for the part number that doesn’t seem to correspond to any existing belts.

I’m assuming he’s out of business since I’ve left a few messages and emails with no reply.

Mike
Reply With Quote
  #2  
Unread 06-17-24, 08:40 PM
RandyArizona RandyArizona is offline
Registered User
 
Join Date: Oct 2022
Location: AZ
Posts: 51
RandyArizona is on a distinguished road
A hint at the odd 4 letter code, could go along way toward helping you.
A description of the belt couldn’t hurt either..
Reply With Quote
  #3  
Unread 06-18-24, 07:17 AM
cbxmike cbxmike is offline
Registered User
 
Join Date: Aug 2014
Location: Atlanta
Posts: 16
cbxmike is on a distinguished road
No description since I do not have the old belt in hand.

Part number on STC: AESBD
Reply With Quote
  #4  
Unread 06-18-24, 09:25 AM
RandyArizona RandyArizona is offline
Registered User
 
Join Date: Oct 2022
Location: AZ
Posts: 51
RandyArizona is on a distinguished road
That’s 5 letters…..
Reply With Quote
  #5  
Unread 06-19-24, 12:12 PM
cbxmike cbxmike is offline
Registered User
 
Join Date: Aug 2014
Location: Atlanta
Posts: 16
cbxmike is on a distinguished road
Yes it is indeed five letters vs the four I originally recalled. Thanks.

Last edited by cbxmike : 06-19-24 at 12:28 PM.
Reply With Quote
  #6  
Unread 06-19-24, 04:37 PM
RandyArizona RandyArizona is offline
Registered User
 
Join Date: Oct 2022
Location: AZ
Posts: 51
RandyArizona is on a distinguished road
The reason I mention that, is with four letters, there is zip..
With 5 letters, I have a ton of cross reference for belts.
Is one of them your belt? Who knows.
So far, any information from you, seems to be “ light”, and unhelpful.
I love a challenge like this, but it is usually with the help of the one I’m helping.
You don’t fall into that category.
Good luck in your search.
Reply With Quote
  #7  
Unread 06-20-24, 02:20 AM
cbxmike cbxmike is offline
Registered User
 
Join Date: Aug 2014
Location: Atlanta
Posts: 16
cbxmike is on a distinguished road
Thanks for the insight Randy. Not sure if you figured out yet that “AE” most likely stands for the defunct company “Aviation Enterprises”! So now we’re back to just three letters! “SBD”. I’m sure you figured that out already. I wish I could give you more but the actual part number off the STC is it! As frustrating as this is for you (and me), it’s all I got!

Maybe we just wait and see if someone out there has this STC on their machine and may have an actual part number for this simple serpentine belt.

My mother used to say if you can’t say anything nice about someone, don’t say anything at all.

Thank you for your help on this. Let’s move on please.

Mike
Reply With Quote
  #8  
Unread 06-26-24, 12:39 PM
hharney's Avatar
hharney hharney is offline
Forum Administrator
 
Join Date: Jul 2002
Location: Michigan (8D4)
Posts: 2,261
hharney is on a distinguished road
Quote:
Originally Posted by cbxmike View Post

I’m assuming he’s out of business since I’ve left a few messages and emails with no reply.

Mike
https://cessnaskymaster.com/
__________________
Herb R Harney
1968 337C

Flying the same Skymaster for 47 years
Reply With Quote
  #9  
Unread 06-28-24, 04:28 PM
cbxmike cbxmike is offline
Registered User
 
Join Date: Aug 2014
Location: Atlanta
Posts: 16
cbxmike is on a distinguished road
A/C Belt

Herb, You were correct with “cessnaskymaster.com”. I was able to speak to Owen Bell who created the STC and he said that there were some minor differences between airframes utilizing this STC and that the only way to get the correct belt was to do what we were going to do anyway. That is, take a string and measure around the pulleys to get the correct length and then he can supply the correct belt. So, there no “one belt fits all” apparently with this mod.

I do have another part need for a nose gear steering boot to replace on my P model. PN: 1542050-1
They are not available anymore apparently like many Cessna parts. Any source or idea would be welcomed. There is the possibility of using a “similar” boot from another Cessna model that may work but I’d like to exhaust the search for the correct part first. Maybe even having a new one created using the old part through 3D printing possibly. Not sure of the legality of that but if it was fire proof and built with high strength silicone, not sure why it couldn’t be a possible solution for many looking for this and other similar parts. There’s YouTube videos of silicone 3D printing for boots similar to this one.

Mike
Reply With Quote
Reply



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is Off
HTML code is Off
Forum Jump


All times are GMT -4. The time now is 09:30 PM.


Powered by vBulletin® Version 3.6.9
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.