Thread: removing front alternator
View Single Post
  #7  
Unread 07-26-23, 09:10 PM
cessnadriver's Avatar
cessnadriver cessnadriver is offline
Registered User
  
Join Date: May 2010
Location: Kempner, TX
Posts: 359
cessnadriver is on a distinguished road
Smile removing front alternator
TO Joes.
Thanks for the reply for removing the alternator!
Here's what I found while remove the alternator. I took a 1/2" BOX END WRENCH ground 1/2" notch in the end to allow it to be used like an open end wrench but with the ability to make small turns of the nut that an open end wrench won't allow. Does that make any sense? FYI-It took almost as long to remove the terminal connections (45 minutes) VS removing the mounting nuts (1hour)!
Thanks again, Regards.
BILLS
Owner/pilot/A&P '65 C337
Last edited by cessnadriver : 07-26-23 at 09:14 PM. Reason: forgot some info
Reply With Quote